0
0

Hornady Match Grade Full Length Die 7mm PRC (.284) – 046324

UPC: 090255463248

$61.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Serious 7mm PRC handloaders know that neck tension is where accuracy lives or dies, and this Hornady Match Grade full length die puts that control right in your hands. Instead of a fixed sizing diameter, it runs interchangeable, self-centering neck bushings so you choose exactly how much the neck gets squeezed down. That means you can resize the body and bump the shoulder in one pass while keeping your brass from getting overworked, which pays off in longer case life and tighter groups downrange.

The die body is machined to match-grade tolerances with one of the cleaner internal finishes you'll find on a production die. A free-floating spindle lets the bushing self-center on the case neck for concentric sizing, and a knurled spindle lock makes swapping bushings quick when you want to test different tension settings. The precision-polished elliptical expander cuts down on friction and case-neck stretch, and it threads in internally so it won't pull loose during use. You also get a replaceable headed decap pin and retainer, so routine maintenance is painless.

What Sets the 7mm PRC Match Grade Die Apart

This is a full length sizer, not a neck-only or shoulder bump die, so it works the entire case and is ideal for brass that needs to chamber reliably in a bolt gun. It uses standard 7/8-14 threads and drops into any common single-stage or progressive press. A Hornady Sure-Loc lock ring clamps around the full die body with a locking screw that stays off the threads, so your settings hold and the die comes out clean without chewing anything up with pliers.

Picking Your Bushing for the 7mm PRC Die

Bushings are sold separately so you can tune tension to your exact brass and load. The simple method is to measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches to land on your bushing size, which accounts for brass spring-back. It's smart to keep a bushing one size above and below your target on the bench so you can fine-tune bullet grip. Two Sure-Loc rings and a plastic storage box come in the package to keep your setup organized.

Key Specifications

  • Manufacturer: Hornady
  • Cartridge: 7mm PRC (.284)
  • Die Type: Full Length Sizer (Bushing)
  • Thread Size: 7/8-14
  • Spindle: Free-floating, self-centering
  • Expander: Precision-polished elliptical
  • Decap Pin: Replaceable headed pin with retainer
  • Lock Ring: Hornady Sure-Loc
  • Bushings: Interchangeable, sold separately
  • MPN: 046324
  • UPC: 090255463248
  • Shipping Weight: 0.58 lb

What’s Included

  • Match Grade full length sizing die
  • Two Hornady Sure-Loc lock rings
  • Replaceable headed decap pin and retainer
  • Plastic storage box

Frequently Asked Questions

Does the Hornady Match Grade 7mm PRC die come with a bushing?

No, the neck sizing bushing is sold separately so you can match the tension to your specific brass and load. This lets you fine-tune how tightly the neck grips the bullet rather than being stuck with a fixed size. The same bushings work in both Hornady's neck size and full length Match Grade dies.

How do I choose the right bushing size for this die?

Measure the outside neck diameter of a loaded round, then subtract about .002 to .003 inches to find your bushing size, which accounts for brass spring-back. Most bolt-gun handloaders aim for around .002 inches of neck tension to start. It helps to keep a bushing one size above and below your target so you can adjust tension to taste.

Is a shellholder included with the 7mm PRC Match Grade die?

No, the shellholder is sold separately. You'll want a shellholder sized for the 7mm PRC case head to use the die in your press. Many reloaders already have one on hand if they load other cartridges that share the same case head.

Will this die fit a standard reloading press?

Yes, it uses standard 7/8-14 threads, so it drops right into common single-stage and progressive presses. The included Sure-Loc lock ring holds your settings in place and comes out cleanly without marring the threads.

Additional information

UPC

090255463248

Manufacturer

Manufacturer Part Number

046324

Shipping Weight

0.58

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Full Length Die 7mm PRC (.284) – 046324”