Description
If you're chasing tight groups out of a .17 Hornet, knowing exactly where your bullet sits in relation to the rifling is half the battle. The Hornady Lock-N-Load Modified Case "A" Series for the .17 Hornet is the piece that makes that measurement possible. It's a genuine brass case that Hornady has reworked specifically to pair with their Lock-N-Load O.A.L. Gauge, giving you a repeatable way to find your rifle's exact overall length rather than guessing from a loading manual.
The modification itself is straightforward but clever. Hornady removes the flash hole and cuts a fine thread into the case head so it screws snugly onto the gauge and stays square in the chamber. The neck gets opened up about .002" over standard so the same bullet you plan to load slides in smoothly but stays concentric, which is what keeps your readings consistent from one measurement to the next. All of their modified cases are built to SAAMI specs and made in the USA.
Why the .17 Hornet Modified Case Comes With Adapter D
Here's the detail a lot of folks miss on this particular caliber. Because the .17 Hornet has such a small case body, it can't thread directly onto a standard gauge like a larger cartridge would. Hornady solves that by including Adapter D right in the package, so you get everything you need to measure in one purchase. That adapter is the reason this A17H kit is specific to the .17 Hornet rather than being interchangeable with other "A" series cases.
Getting the Most From Your Lock-N-Load Setup
Thread the case onto your O.A.L. Gauge, seat your chosen bullet, and ease it into the chamber until it touches the lands. That gives you a true starting point for setting bullet jump, and from there you can tune your seating depth to find what your barrel likes best. A few thousandths of movement really can be the difference between so-so accuracy and a load that stacks them on top of each other. Keep in mind the O.A.L. gauge is sold separately, so if you don't already have one you'll want to grab it alongside this case.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: A17H
- UPC: 090255703313
- Caliber: .17 Hornet
- Type: Lock-N-Load O.A.L. Gauge Modified Case with Adapter
- Case Material: Brass
- Neck: Opened approximately .002" over standard
- Case Head: Flash hole replaced with fine thread for gauge
- Spec: Manufactured to SAAMI specs
- Country of Origin: Made in the USA
What’s Included
- One .17 Hornet Lock-N-Load modified case
- Adapter D (required for .17 Hornet)
Frequently Asked Questions
Does the .17 Hornet modified case include the adapter?
Yes. Because the .17 Hornet has such a small case body, it needs Adapter D to work with the Lock-N-Load O.A.L. Gauge, and Hornady includes that adapter in the package. You get both the modified case and the adapter in this A17H kit.
Do I need a separate O.A.L. gauge to use this case?
You do. This modified case threads onto the Hornady Lock-N-Load Overall Length Gauge, which is sold separately. If you don't already own one, pick up the gauge along with this case so you have the complete setup.
What does the Hornady modified case actually do?
It lets you measure the overall length where your bullet first touches the rifling in your specific barrel. From that reading you can set your bullet's jump to the lands and tune seating depth, which is one of the most effective ways to improve accuracy with your handloads.
Why is the neck opened up slightly on this case?
Hornady opens the neck about .002" over standard so the bullet you intend to load slides in smoothly without binding. That slight clearance still keeps the bullet concentric, which gives you consistent, repeatable measurements every time you use the gauge.





Reviews
There are no reviews yet.