Description
If you shoot a Makarov and you're tired of chasing hard-to-find factory ammo, loading your own is the way to go, and this Hornady Custom Grade Series II set gives you everything you need to size, expand, and seat the .364 bullets that round uses. These are the dies serious handloaders reach for because they're built to tight tolerances and finished the way good tools should be. Each one is hand-inspected and hand-polished to a mirror shine inside, which is a big part of why cases feed through smoothly and why this set runs without case lube on your straight-wall Makarov brass.
What Sets the Hornady 9×18 Makarov Dies Apart
The full-length size die features Hornady's Zip-Spindle, a non-slip design that keeps the decap pin and spindle centered while you tighten it down. No more fighting a spindle that walks out of alignment mid-adjustment. The size die brings cases back to SAAMI minimum specs, the pistol-style expander opens the case mouth just enough to seat bullets cleanly, and the seater die handles bullet depth with a simple adjustment screw.
Setup and Maintenance on the Custom Grade Series II Set
Wrench flats machined into the die bodies make adjustments easy and keep you from marring threads with pliers. The Sure-Loc lock rings clamp around the entire die body for constant, even pressure so your settings hold. When it's time to clean, the retainer ring and spring at the base of the seater pop out in seconds, so breaking the die down for a wipe-down is painless.
Everything ships in Hornady's stackable storage box, which has room for the dies plus a shell holder and Lock-N-Load bushings if you run those. Keep in mind the shell holder and bushings are sold separately, which is standard for die sets like this. Hornady backs their Custom Grade dies against breaking or wearing out under normal use, so this is a set you buy once and keep on the bench for the long haul.
Key Specifications
- Manufacturer: Hornady
- Caliber: 9x18mm Makarov
- Bullet Diameter: .364 in
- Die Set Type: Full-Length 3-Die Set
- Series: Custom Grade Series II / New Dimension
- Application: Pistol
- Quantity: 3 Dies
- Key Features: Zip-Spindle, Sure-Loc Lock Rings, Elliptical/Pistol Expander, No Case Lube Required
- MPN: 546512
- UPC: 090255565126
What’s Included
- Full-Length Sizing Die with Zip-Spindle and Sure-Loc Lock Ring
- Pistol-Style Expander Die
- Bullet Seating Die
- Spindle Lock, Decap Pin Retainer, and Headed Decap Pin
- Stackable die storage box
Frequently Asked Questions
What bullet diameter does the 9×18 Makarov die set use?
This set is cut for .364 inch diameter bullets, which is the correct size for 9×18 Makarov. That's slightly larger than the .355 inch bullets used in standard 9mm Luger, so be sure you're loading the right projectiles. Using 9mm Luger bullets in a Makarov can cause accuracy and pressure issues.
Do I need case lube with these Hornady Custom Grade dies?
No, the straight-wall sizing die is designed to run without case lube, which keeps your 9×18 Makarov loading process cleaner and faster. The polished internal finish is what makes lube-free sizing possible. If you want, a light touch of lube never hurts, but it isn't required.
Does this die set come with a shell holder?
No, the shell holder is sold separately, which is standard for Hornady Custom Grade die sets. You'll want the correct shell holder for the 9×18 Makarov case rim to run these on your press. Lock-N-Load bushings are also sold separately if your press uses them.
Is this set compatible with standard reloading presses?
Yes, these dies use standard 7/8-14 threads and work with common single-stage and progressive presses. If you run a modern Hornady press with the Lock-N-Load bushing system, you'll want to add those bushings to use the quick-change feature. Otherwise they thread right into a conventional press just fine.




Reviews
There are no reviews yet.