Description
Loading .357 Sig is one of those jobs where the details matter, and this Hornady Custom Grade Series II set is built to handle the bottleneck pistol case the right way. You get three dies in the package: a full-length sizer, an expander, and a seating die, all machined from heat-treated steel and finished to run smooth. It's the New Dimension design Hornady built its reputation on, so setup and repeat adjustments stay predictable load after load.
What the Hornady .357 Sig Die Set Brings to the Bench
The standout here is the Zip-Spindle. Instead of a smooth decapping spindle that likes to slip when you snug it down, Hornady cuts light threads into the spindle and collet so it locks in place without creeping. Tightening the spindle lock is quick and it stays put, which is a small thing until you've fought a sliding spindle on a different brand. The sizer die runs a hardened, polished internal profile that resizes brass without dragging or scratching your cases.
Seating That Keeps .357 Sig Bullets Straight
The seating die is where this set earns its keep. It uses a floating bullet alignment sleeve and a floating seating stem that center the bullet with the case as it enters the die, so you get straight seating and better runout numbers. There's a built-in crimper and a seater adjustment screw for dialing in depth, plus a locking retainer spring that pops out in seconds when it's time to clean the die.
A Couple Things Worth Knowing
This is a steel full-length sizer, so case lube is required before you run brass through it. The set uses shell holder #10, and the shell holder is sold separately, so grab one if you don't already have it. Hornady backs these dies with a lifetime guarantee against breaking or wearing out under normal use, which tells you how they feel about the build quality.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546575
- UPC: 090255565751
- Caliber: .357 Sig (.355")
- Die Series: Custom Grade New Dimension Series II
- Number of Dies: 3
- Dies Included: Full-length sizer, expander, seater
- Die Type: Full Length
- Sizer Material: Heat-treated steel (case lube required)
- Thread Size: 7/8"-14
- Shell Holder: #10 (sold separately)
- Storage Box: Included
What’s Included
- Full-length sizer die
- Expander die
- Seater die with built-in crimper
- Sure-Loc lock rings
- Plastic storage box
Frequently Asked Questions
Does the Hornady .357 Sig die set require case lube?
Yes. This set uses a steel full-length sizer rather than a carbide one, so you'll need to lube your brass before resizing. A quick pass with a spray lube like Hornady One Shot handles it and keeps cases moving smoothly through the sizer.
What shell holder do I need for this set?
The .357 Sig dies use a #10 shell holder. It is not included in the box, so if you're new to this caliber you'll want to pick one up separately before your first session.
What's the Zip-Spindle on the Hornady Custom Grade dies?
The Zip-Spindle has light threads cut into the decapping spindle and collet so it won't slip when you tighten the spindle lock. It makes setup faster and keeps your depriming pin from drifting out of position during use.
Will these dies work on a single stage or progressive press?
They use standard 7/8"-14 threads, so they'll thread into just about any common reloading press, single stage or progressive. The set includes Sure-Loc lock rings to hold your settings once you have everything dialed in.




Reviews
There are no reviews yet.