0
0

Hornady New Dimension Series III 2-Die Set 6mm Rem

UPC: 090255562460

$66.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6mm Remington has always rewarded the reloader who takes the time to get things right, and the Hornady New Dimension Series III 2-Die Set gives you the tools to do exactly that. This caliber-specific set pairs a full-length sizing die with a bullet seating die, both machined from steel and hand-polished to a mirror finish inside. That smooth internal profile keeps brass from sticking or dragging and helps you work through a batch of cases without fighting the press.

What Sets the Series III 6mm Rem Dies Apart

The sizing die uses Hornady's Zip Spindle design, which locks the decapping assembly in place to eliminate slippage while still letting you make fine adjustments. A series of light threads on the spindle and collet means you can nudge it a hair at a time or run it up and down quickly when you need bigger changes. The elliptical expander is a nice touch over a standard ball type, pulling through the case neck with less friction and reducing the neck stretch that shortens brass life. A hardened steel decapping pin handles depriming without bending or breaking, even on cases with crimped primer pockets.

Dialing In the Seating Die

The bullet seater runs Hornady's in-line seating system, which holds the bullet, case neck, and seating stem in alignment inside a floating sleeve before the bullet ever enters the case. That bit of engineering is where straight, concentric ammo comes from, and it pays off downrange with tighter groups. The seater adjustment screw dials in your seating depth cleanly, and there's a built-in crimper if you want to add a crimp without tying up a separate station on your press.

Built to Outlast Your Rifle

Hornady backs these dies with a no-risk lifetime guarantee against breaking or wearing out from normal use. Sure-Loc lock rings with wrench flats clamp around the whole die and hold their setting with a screw that never touches the threads, so your adjustments stay put trip after trip to the bench. Everything stores in Hornady's compartmentalized red die box, stackable and labeled, so your 6mm Rem setup stays organized and ready to go.

Key Specifications

  • Manufacturer: Hornady
  • Caliber: 6mm Remington (244 Rem)
  • Bullet Diameter: .243
  • Die Series: Series III (Custom Grade New Dimension)
  • Set Configuration: 2-Die Set (Full-Length Sizer + Seater)
  • Die Function: Full-Length Sizing / Bullet Seating
  • Material: Hand-polished steel
  • Adjustment System: Zip Spindle
  • Expander Type: Elliptical expander
  • Seating System: In-line sliding alignment sleeve
  • Crimp: Built-in crimper in seating die
  • Lock Rings: Sure-Loc with wrench flats
  • Warranty: No-risk lifetime guarantee
  • Manufacturer Part Number: 546246
  • UPC: 090255562460
  • Shipping Weight: 1.4 lbs

What’s Included

  • Full-length sizing die
  • Bullet seating die with built-in crimper
  • Sure-Loc lock rings with wrench flats
  • Allen wrench for locking rings
  • Compartmentalized storage die box
  • Instruction sheet

Frequently Asked Questions

Does the Hornady Series III 6mm Rem set include a shell holder?

No, a shell holder is not included with this die set. You'll need to pick up the correct shell holder separately to match your press and the 6mm Rem case head. It's a common and inexpensive add-on at any reloading bench.

Will these dies work for both 6mm Remington and .244 Remington brass?

Yes. The 6mm Remington and .244 Remington are the same cartridge with a renamed designation, so this set is configured for both. Any brass headstamped .244 Rem or 6mm Rem will size and load with these dies.

Can I crimp with this 2-die set, or do I need a separate crimp die?

The bullet seating die has a built-in crimper, so you can apply a crimp without adding a dedicated crimp die to your press. That said, many handloaders running bolt guns skip the crimp entirely for best accuracy. It's there if you want it, which makes this a flexible setup.

What does the Zip Spindle design do on the sizing die?

The Zip Spindle lets you adjust the decapping and expander assembly up or down and then lock it solidly so it doesn't slip during use. Light threads on the spindle allow fine, incremental tweaks, or you can zip it quickly for larger movements. It makes dialing in your sizing die faster and keeps the setting repeatable.

Additional information

UPC

090255562460

Manufacturer

Manufacturer Part Number

546246

Shipping Weight

1.4

Reviews

There are no reviews yet.

Be the first to review “Hornady New Dimension Series III 2-Die Set 6mm Rem”