0
0

Hornady New Dimension Series I 2-Die Set 7mm WSM (546327)

UPC: 090255563276

$63.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading your own 7mm WSM, the Hornady New Dimension Series I 2-Die Set gives you the two tools that matter most without piling on extras you don't need. You get a Custom Grade full-length sizing die and a bullet seating die, both machined from heat-treated select steel and hand polished inside so they won't scratch your brass. Hornady groups their dies into three series strictly for pricing, so the construction and quality here are the same as the rest of the Custom Grade lineup.

What Sets the Series I 7mm WSM Dies Apart

The sizing die runs Hornady's Zip Spindle decap assembly, which uses a series of fine threads cut into the spindle and collet. That little design tweak lets you make small, precise adjustments or zip the spindle up and down fast, and it locks down without the usual knuckle-busting. The elliptical expander is a Hornady exclusive that beats a standard ball expander for smooth neck sizing, cutting friction and neck stretch as your brass works through the die. The decapping pin is hardened steel, so it holds up even when you're punching out crimped primers.

Dialing In Your 7mm WSM Handloads

The seating die carries a floating bullet alignment sleeve and stem that pre-align the bullet to the case mouth before anything seats, which helps keep runout down and consistency up. It will also apply a crimp if your load calls for one. Both dies ship with Hornady's double-flat Sure-Loc lock rings that clamp around the full circumference of the die, so your settings stay put shot after shot and the locking screws never bite into the threads.

Everything tucks into a compartmentalized plastic storage box, and the whole set is backed by Hornady's guarantee that the dies won't break or wear out under normal use. For a short magnum like the 7mm WSM that thrives on careful handloading, this is a dependable foundation to build your pet load on. Note that a matching shell holder is not included.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 546327
  • UPC: 090255563276
  • Caliber: 7mm WSM (Winchester Short Magnum)
  • Projectile Diameter: .284
  • Die Series: Series I Custom Grade New Dimension
  • Die Style: Full-Length 2-Die Set
  • Dies Included: Full-length sizing die and bullet seating die
  • Gun Type: Rifle
  • Material: Heat-treated select steel
  • Lock Rings: Sure-Loc double-flat lock rings
  • Spindle: Zip Spindle decap assembly
  • Expander: Elliptical expander
  • Shipping Weight: 1.35 lbs

What’s Included

  • Custom Grade full-length sizing die
  • Bullet seating die
  • Two Sure-Loc double-flat lock rings
  • Compartmentalized plastic storage box

Frequently Asked Questions

What dies come in the Hornady Series I 7mm WSM set?

This is a two-die set that includes a Custom Grade full-length sizing die and a bullet seating die. The sizing die resizes the whole case and deprimes it with the Zip Spindle assembly, while the seater positions and seats your bullet. It covers the core steps for standard 7mm WSM handloading.

Does the 7mm WSM die set include a shell holder?

No, a shell holder is not included with this set. You'll need to add the correct shell holder for the 7mm WSM case head, which is the same one used by other Winchester Short Magnum cartridges. Most press and die brands offer a compatible holder sold separately.

Can the seating die crimp the bullet?

Yes, the Hornady seating die can apply a crimp to help secure the bullet in the case neck if your load benefits from it. You can also run it without crimping for loads where you'd rather rely on neck tension alone. It's up to how you set the die for your particular recipe.

Will these dies work with any standard reloading press?

Yes, the dies use the standard 7/8-14 threading found on common single-stage and progressive presses. That makes the set compatible with the vast majority of reloading presses on the market. Just pair them with the right shell holder for the 7mm WSM case.

Additional information

UPC

090255563276

Manufacturer

Manufacturer Part Number

546327

Shipping Weight

1.35

Reviews

There are no reviews yet.

Be the first to review “Hornady New Dimension Series I 2-Die Set 7mm WSM (546327)”