Description
If you're loading your own .300 Win Mag, this Hornady Series I set gives you the two dies that do the heavy lifting: a full-length sizing die and a seating die. These are part of Hornady's Custom Grade New Dimension lineup, machined from select steel and polished inside so brass slides through without sticking or dragging. It's the kind of gear that earns a permanent spot on your bench.
The sizing die runs Hornady's Zip Spindle setup, with light threads cut into both the spindle and the collet. That lets you make fine adjustments by turning the spindle, or zip it up and down quickly for bigger moves, all without the spindle slipping on you mid-session. Tightening the lock is easy on the knuckles too. Instead of a standard ball expander, this die uses an elliptical expander that glides through the case neck, cutting down on friction and the neck stretch that ages your brass faster.
What the .300 Win Mag Die Set Brings to the Bench
The seating die has a floating bullet alignment sleeve and stem that pre-align the bullet and case before the bullet ever starts into the neck. That bit of self-centering is where a lot of your concentricity and accuracy comes from. The seater also applies a crimp if you want one, so you can lock a bullet in place for heavier recoiling loads or tube-fed setups.
Lock Rings and Lifetime Backing
Both dies wear Hornady's Sure-Loc lock rings, which clamp around the full circumference of the die and apply even pressure across the threads so your settings stay put. The whole set ships in a compartmentalized plastic storage box to keep everything organized. It's backed by Hornady's lifetime warranty, meaning they stand behind these against breaking or wearing out from normal use.
One thing worth knowing: this set uses the #5 shell holder, which is sold separately. Grab one if you don't already have it in your kit, and you'll be ready to size and seat as soon as you get to the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546352
- UPC: 090255563528
- Caliber: .300 Winchester Magnum
- Bullet Diameter: .308
- Product Type: Full Length 2-Die Set
- Series: Series I
- Die Line: Custom Grade New Dimension
- Shell Holder: #5 (sold separately)
- Primer Punch Size: Large
- Length: 7.45 in
- Shipping Weight: 1.45 lbs
What’s Included
- Full-length sizing die
- Bullet seating die
- Two Sure-Loc lock rings
- Compartmentalized plastic storage box
Frequently Asked Questions
Does this .300 Win Mag die set come with a shell holder?
No, the shell holder is sold separately. This set uses the #5 shell holder, so pick one up if it isn't already in your kit. You'll need it before you can size and seat cases on your press.
What's the Zip Spindle and why does it matter?
The Zip Spindle has light threads cut into both the spindle and the collet on the sizing die. That means you can make small, precise adjustments by turning the spindle, or zip it up and down fast for larger changes. Best of all, it locks down without slipping and doesn't take a knuckle-busting effort to tighten.
Can the seating die crimp bullets?
Yes, the seating die applies a crimp to secure the bullet in the case. That's handy for heavy-recoiling loads where you want to keep bullets from shifting under recoil. You can set it up to seat and crimp in one step or seat without crimping if you prefer.
Is this a two-die or three-die set?
It's a two-die set, including a full-length sizing die and a bullet seating die. A few retailer listings mislabel it as a three-die set, but the box contains two dies plus two Sure-Loc lock rings in a storage case.





Reviews
There are no reviews yet.