0
0

Hornady Crimp-On Gas Checks .270 Cal (.277″) Copper 1000ct

UPC: 090255270501

$50.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you cast your own .270 caliber bullets, these Hornady crimp-on gas checks are what let you run them hard without turning your barrel into a lead mine. The small copper cup seats onto the rebated shank at the base of your cast bullet and crimps in place as the bullet runs through your sizing die. Once it's on there, it forms a tougher base that seals against the hot gases that eat up plain-base lead at higher pressure and speed.

What the .270 Gas Check Does for Your Cast Bullets

Plain-base cast bullets start to struggle once you push them past the roughly 1,400 to 1,800 fps range, where escaping gas slips past the base and causes gas cutting. That's where leading, flyers, and unbalanced bullets come from. The copper check blocks that gas, grips the rifling, and lets you shoot a softer alloy at speeds it couldn't survive on its own. For .270 Win and .270 WSM cast loads, that's the difference between a clean bore and a barrel full of fouling.

Fitting the Hornady Crimp-On Gas Checks

These measure .277" to match standard .270 caliber bullets, and they're built to crimp on during the sizing step rather than get glued or hand-pressed. The one thing to check before you order is your mold. Your bullet design needs a gas-check shank for these to seat squarely and stay put. If your mold casts plain-base bullets with no shank, these won't attach correctly.

Made in the USA and Boxed 1000 Deep

Hornady runs these in copper, the material that's been the standard for gas checks for decades, and ships them a thousand to a box. That's a solid stash for a serious caster who's loading .270 rifle rounds in volume. They're a consistent, no-drama component that seats clean and keeps your cast bullet program running smooth.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 7050
  • UPC: 090255270501
  • Caliber: .270 Caliber (.277")
  • Type: Crimp-On Gas Check
  • Material: Copper
  • Color: Copper
  • Quantity: 1000 per box
  • Country of Origin: USA
  • Shipping Weight: 0.5563 lbs

What’s Included

  • 1000 Hornady .270 caliber crimp-on copper gas checks

Frequently Asked Questions

What does the Hornady .270 gas check actually do?

It's a shallow copper cup that crimps onto the base of your cast lead bullet during sizing. The check seals off hot propellant gas so it can't slip past the base and cause gas cutting, which keeps leading down and helps the bullet grip the rifling. The practical upside is you can shoot softer alloys at higher velocities and get more consistent accuracy.

Do I need a special mold to use these gas checks?

Yes. Your bullet needs to be cast from a gas-check mold, meaning it has a reduced base shank the check seats onto. If your mold casts plain-base bullets with no shank, these checks won't attach properly. Check your mold design before ordering.

When is a gas check worth using on .270 cast loads?

Gas checks earn their keep once you combine higher pressure and higher velocity, generally above the 1,400 to 1,800 fps range where plain-base bullets start to struggle. For rifle cartridges like the .270 Win and .270 WSM running cast loads, that covers most serious loads. At very low velocities a gas check usually isn't necessary.

How do these crimp-on gas checks go on?

They seat and crimp onto the bullet base as you run the bullet through your sizing die, so it happens as part of your normal sizing and lubing step. Gluing them on isn't recommended since proper crimping keeps the check aligned and locked in place. A standard bullet sizing setup handles it just fine.

Additional information

UPC

090255270501

Manufacturer

Manufacturer Part Number

7050

Caliber/Gauge

.270 Caliber

Quantity

1000

Shipping Weight

0.5563

Reviews

There are no reviews yet.

Be the first to review “Hornady Crimp-On Gas Checks .270 Cal (.277″) Copper 1000ct”