Description
Every reloader has had that moment at the range where a round hangs up in the chamber and brings the whole session to a halt. The Hornady Lock-N-Load Cartridge Gauge for 9mm Luger is built to catch those problems at the bench instead. Machined from steel and cut to SAAMI maximum tolerances, it gives you a solid go/no-go reference for both resized brass and loaded ammo. This version is marked .355 for 9mm Luger and also works for 9×21 where that chambering applies.
How the Lock-N-Load 9mm Gauge Earns Its Spot on the Bench
Using it couldn't be simpler. You drop a case or a finished cartridge into the gauge and check that the head sits flush with the back. One end of the gauge has a slight groove that shows you the max and min headspace window, so you can tell at a glance whether a round falls inside spec or needs another look. No calipers, no math, no guesswork on whether your sizing die is doing its job.
Why 9mm Handloaders Reach for This Cartridge Gauge
Nine millimeter is one of the trickiest pistol rounds to load consistently because of the tapered case and the variety of range brass floating around. A gauge like this takes the mystery out of it. When something isn't chambering the way it should, you can diagnose whether the issue is case length, a bulge at the base, or a crimp that went too far. For folks running a progressive press and cranking out volume, spot-checking rounds through the gauge is cheap insurance against a malfunction when it counts.
The steel construction means this is a buy-it-once tool that will outlast most of the presses it sits next to. It's a small piece of gear that quietly saves you time, brass, and frustration over thousands of rounds. One thing worth knowing up front: this gauge checks case and cartridge fit, not overall cartridge length, so keep your calipers handy for seating depth.
Key Specifications
- Manufacturer: Hornady
- Caliber: 9mm Luger / 9×21 (.355")
- Material: Steel
- Cut To: SAAMI maximum tolerances
- Checks: Resized cases and loaded ammunition fit
- Headspace Reference: Grooved end for max/min headspace
- Made In USA: Yes
- Manufacturer Part Number: 380701
- UPC: 090255807011
- Shipping Weight: 0.15 lb
What’s Included
- Hornady Lock-N-Load 9mm Luger / 9×21 (.355") Cartridge Gauge
Frequently Asked Questions
What does the Hornady Lock-N-Load 9mm cartridge gauge actually check?
It verifies that your resized brass and loaded 9mm ammo will fit correctly in a SAAMI-spec chamber. You drop the case or cartridge in and confirm the head sits flush with the back of the gauge. The grooved end also gives you a quick max and min headspace reference. Keep in mind it checks case and cartridge fit rather than overall cartridge length, so you'll still want calipers for seating depth.
Can I use this gauge for 9×21 as well as 9mm Luger?
Yes. The gauge is marked .355 for 9mm Luger and is noted for 9×21 use where that chambering applies. Both cartridges share the same case diameter, which is why Hornady lists them together on this gauge.
Is the gauge made of steel, and will it hold up over time?
It's precision machined from steel and cut to SAAMI maximum tolerances. That construction means it holds its dimensions and is built to last for years of bench use. It's the kind of tool you buy once and keep around through multiple presses and projects.
Do I need a cartridge gauge if I'm already careful with my reloads?
Even careful handloaders run into inconsistent range brass, tired sizing dies, or the occasional bulged case. A quick pass through the gauge catches those issues at the bench instead of at the range. For anyone running volume on a progressive press, spot-checking rounds is inexpensive insurance against a malfunction.




Reviews
There are no reviews yet.