Description
Every reloader eventually builds a round they want to take apart, whether it's a wrong powder charge, a seating depth that drifted, or a batch you just want to salvage components from. The Hornady Cam-Lock Bullet Puller Collet #5 is the piece that makes pulling those .277 diameter bullets quick and clean. It's sized specifically for .270 caliber projectiles, which covers cartridges like the .270 Winchester, .270 WSM, .270 Weatherby, and 6.8mm loads.
The collet is the gripping heart of the whole system. It clamps around the bullet so you can draw the case away without hammering anything or leaving ugly marks on the projectile you're trying to reuse. Compared to the old impact-style pullers that have you whacking a plastic body against your bench, the cam-lock setup is a lot faster once you get the feel for it, and a lot quieter too.
How the Cam-Lock Collet #5 Earns Its Keep
Drop the collet into the Cam-Lock Bullet Puller body, run the case up into your press, then clamp down on the handle and pull. The bullet stays put in the collet while the case backs out. Reloaders who load several cartridges sharing the .277 bullet find this size gets used constantly, so it's a smart one to keep in the drawer. Dialing in the right adjustment takes a round or two of practice, after which it becomes a quick, repeatable motion.
What to Know Before You Order the #5 .277
This listing is the collet by itself, not the complete puller. You'll need the Hornady Cam-Lock Bullet Puller body to use it, and this collet is intended for rifle cartridges only. If you already run the cam-lock system and just need the correct size for your .270 bullets, the #5 is exactly what drops in. Made in the USA, it's a simple, durable part that does one job and does it well.
Key Specifications
- Manufacturer: Hornady
- Collet Size: #5
- Bullet Diameter: .277
- Caliber/Gauge: .270 / 6.8 mm (.277)
- Intended Use: Rifle cartridges only
- Compatibility: Hornady Cam-Lock Bullet Puller
- Manufacturer Part Number: 392158
- UPC: 090255921588
- Country of Origin: United States
What’s Included
- Hornady Cam-Lock Bullet Puller Collet #5 (.277)
Frequently Asked Questions
What calibers does the Cam-Lock Collet #5 fit?
The #5 collet is sized for .277 diameter bullets, which is the .270 caliber family. That covers popular cartridges like the .270 Winchester, .270 WSM, .270 Weatherby, and 6.8mm loads. If your bullet measures .277 across, this is the collet you want.
Does this collet come with the bullet puller?
No, this listing is for the collet only. You'll need the Hornady Cam-Lock Bullet Puller body to use it, since the collet is the clamping insert that drops into that tool. If you already own the puller, this just adds .277 capability to your setup.
Can I use the #5 collet on pistol cartridges?
This collet is intended for rifle cartridges only. The cam-lock collets are built around rifle bullet shapes and diameters, so stick to rifle loads with this one. Trying to pull pistol bullets with it isn't what it's designed for.
Why choose a cam-lock puller over an impact puller?
The cam-lock system grips the bullet in the collet and pulls it with your press, which is faster and quieter than banging an impact puller on the bench. It also leaves the bullet mark-free so you can reuse the component. Many reloaders keep both, but reach for the cam-lock when they have volume to pull.





Reviews
There are no reviews yet.