0
0

Hornady Cam-Lock Bullet Collet #13 .451/.458 .45 Cal – 392166

UPC: 090255921663

$13.99

74 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Cam-Lock Bullet Collet #13 is the piece that makes your Cam-Lock Bullet Puller work for the big .45 bores. Sized for .451 and .458 diameter bullets, this collet slips into the puller body, clamps around the bullet, and uses the leverage of your reloading press to draw the projectile straight out of the case. No mallets, no banging a cartridge against a block, and no powder scattered across your bench. If you have ever salvaged a batch of loads that didn't come together right, you already know how handy that is.

What the #13 Collet Fits

This one is built for the fat .45 rifle cartridges. It covers .450 Bushmaster, .458 SOCOM, .45-70 Government, .450 Marlin, .458 Winchester Magnum, .458 Lott, .460 Weatherby, and .450 Nitro Express. Keep in mind these collets are caliber-specific, so the number stamped on each one tells you which bullet diameter it grips. The #13 is strictly a rifle collet and isn't meant for pistol cartridges.

Why Reloaders Reach for the Cam-Lock System

The appeal here is control. The cam action locks the collet onto the bullet just above the case mouth, then a pull of the press handle pops it loose. Done right, it leaves the bullet unmarred and keeps your powder in the case where you can reuse it. That makes it a favorite for anyone correcting a seating depth mistake, breaking down surplus or old ammo, or pulling components to re-test a load. It is a far cleaner and quieter process than the kinetic hammer-style pullers.

Keeping Your Setup Complete

Think of the collets as the interchangeable business end of the tool. One Cam-Lock Bullet Puller body handles your whole reloading bench as long as you have the right collet for each caliber you load. If the .45 rifle rounds are part of your rotation, the #13 is the one that gets you there. The puller body itself is sold separately, so make sure you have that on hand before you put this collet to work.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 392166
  • UPC: 090255921663
  • Collet Number: #13
  • Bullet Diameter: .451 / .458
  • Caliber: .45 Caliber
  • Cartridge Type: Rifle
  • Fits: Hornady Cam-Lock Bullet Puller
  • Country of Manufacture: United States

What’s Included

  • One Hornady Cam-Lock Bullet Collet #13 (.451/.458)

Frequently Asked Questions

Which cartridges does the Hornady Cam-Lock Bullet Collet #13 work with?

The #13 collet is sized for .451 and .458 diameter bullets, so it covers rounds like .450 Bushmaster, .458 SOCOM, .45-70 Government, .450 Marlin, .458 Winchester Magnum, .458 Lott, .460 Weatherby, and .450 Nitro Express. It is designed for rifle cartridges only and is not intended for pistol rounds.

Do I need the Cam-Lock Bullet Puller to use this collet?

Yes. This is a replacement collet, not a complete puller, so it installs into the Hornady Cam-Lock Bullet Puller body. The puller itself is sold separately, and one puller body will accept whichever caliber-specific collet you need.

Will pulling bullets with the #13 collet damage the bullet or brass?

When the tension is set correctly, the collet grips the bullet just above the case mouth and draws it out without marring it. It also keeps the powder in the case so you can reuse your components, which is a big advantage over hammer-style inertia pullers.

How is the Cam-Lock system better than a kinetic hammer puller?

The cam action clamps the collet around the bullet and uses your press leverage to pull it, so there is no repeated banging on your bench. It is quieter, cleaner, and keeps powder contained, which makes it a lot easier when you are breaking down a batch of loads.

Additional information

UPC

090255921663

Manufacturer

Manufacturer Part Number

392166

Caliber/Gauge

.45 Caliber

Shipping Weight

0.05

Reviews

There are no reviews yet.

Be the first to review “Hornady Cam-Lock Bullet Collet #13 .451/.458 .45 Cal – 392166”