Description
The Hornady Bore Driver ELD-X is a .50 caliber muzzleloader projectile that swaps the traditional sabot for a completely different approach. Instead of wrapping a bullet in plastic, it uses a polymer base that seats behind the bullet, seals the bore, and engages the rifling on its own. That means fast, easy loading shot after shot, plus consistent pressure and the kind of accuracy that saboted setups sometimes struggle to hold onto as fouling builds up. Each bullet weighs 340 grains and measures .499 in diameter, giving you a heavy, hard-hitting projectile built for reaching out.
How the Bore Driver System Works
The magic here is in that polymer base. It has a post that fits up into the bottom of the bullet, and at ignition the post swells in diameter to grip the bullet from the inside for better torque engagement. Centering petals hold the bullet's boattail while the skirt bites the rifling, so everything stays aligned as it leaves the muzzle. On top sits a proven ELD-X bullet with a tough copper alloy jacket, a Heat Shield polymer tip, and an InterLock ring that helps the jacket and core hang together for solid weight retention.
Real-World Performance With the Bore Driver ELD-X
Blackhorn 209 is the propellant of choice with these, and folks running charges in the 70 to 110 grain range are seeing velocities right around 1,800 to 2,100 fps depending on the rifle and load. Guys shooting CVA Accura, TC Bone Collector, and Knight rigs have posted sub-inch groups at 50 yards and tight clusters at 100. On game it earns its keep too, with real hunters taking deer, elk, and even moose and reporting deep penetration and impressive wound channels. This bullet was designed around a 1:28 twist barrel, so if your muzzleloader runs a similar or faster twist rate, it's worth a serious look.
When you've got one shot to make it count during muzzleloader season, the Bore Driver ELD-X gives you a clean-loading, hard-hitting option that punches well above what a lot of people expect from a black powder gun.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 667714
- UPC: 090255677140
- Caliber: .50 (.499 diameter)
- Bullet Weight: 340 gr
- Bullet Style: ELD-X Polymer Tip
- Base Type: Polymer Base (not a sabot)
- Jacket: Copper Alloy with InterLock Ring
- Recommended Game: Medium to Large Game
- Quantity: 12 per box
- Length: 7.6
What’s Included
- 12 Hornady Bore Driver ELD-X .50 caliber 340 grain projectiles
- 12 polymer bases
Frequently Asked Questions
Does the Bore Driver ELD-X need a sabot?
No, and that's the whole point of the design. The Bore Driver uses a polymer base that seats behind the bullet and engages the rifling directly, so there's no sabot to mess with. This makes for quick, easy loading and keeps performance consistent from shot to shot.
What powder and charge work best with the 340 grain Bore Driver ELD-X?
Blackhorn 209 is far and away the favorite propellant for this bullet, and it was developed around that powder. Hunters commonly run anywhere from 70 to 110 grains by volume, landing velocities in the 1,800 to 2,100 fps range depending on the rifle. Start on the lower end and work up while watching your groups to find what your gun likes.
What twist rate does the Bore Driver ELD-X like?
This bullet was designed around a 1:28 twist barrel, which is common on modern .50 caliber inline muzzleloaders. Rifles with a 1:28 or faster twist tend to stabilize this heavy 340 grain projectile well. If your barrel is slower than that, a lighter bullet may group better for you.
Is the Bore Driver ELD-X a good elk and big game bullet?
It's built for exactly that, with a tough copper alloy jacket and InterLock ring designed for deep penetration and weight retention on medium to large game. Real-world hunters have used it successfully on deer, elk, and even moose. As with any muzzleloader load, dialing in an accurate charge and practicing at your intended range matters just as much as the bullet itself.





Reviews
There are no reviews yet.