Description
If you're loading 300 PRC and want gear that keeps your cases straight and your runout low, this Hornady Series I two-die set covers the two jobs that matter most: sizing your fired brass back to spec and seating bullets consistently. It's part of Hornady's Custom Grade New Dimension lineup, which has been the go-to standard for rifle reloaders for a long time, and it's built from hardened, polished steel that holds up load after load.
What the Series I 300 PRC Set Brings to the Bench
The full-length sizing die uses the Zip Spindle design, which puts a series of light threads on the spindle and collet. That means you can turn the spindle for fine decapping adjustments or just zip it up and down for bigger moves, then lock it down without fighting it. Up top, the elliptical expander beats a standard ball expander by cutting friction and case neck stretch, so your necks come out smooth and your brass lasts longer.
Seating Bullets Straight with the Series I Seater
The seater die has a floating bullet alignment sleeve that pre-aligns the bullet and case neck before the bullet ever enters, which keeps things concentric and helps accuracy. The adjustment screw dials in your seating depth easily, and the die includes a built-in crimp if you want to lock the bullet in place for a hunting or magazine-fed load.
Built to Last on the Hornady 300 PRC Dies
Both dies wear Hornady's Sure-Loc lock rings, a split-ring design that clamps around the whole die body with wrench flats so you're not reaching for pliers. The locking retainer spring pops out in seconds when it's time to clean, and the whole set stores in a compartmentalized plastic box. Hornady backs these with a no-risk lifetime warranty, so if something breaks or wears out from normal use, they'll make it right. For long-range hunters and precision loaders running the 300 PRC, this is a dependable, no-nonsense set that just gets the work done.
Key Specifications
- Manufacturer: Hornady
- Series: Series I / Custom Grade New Dimension
- Caliber: .300 PRC (Precision Rifle Cartridge)
- Bullet Diameter: 0.308 in
- Product Type: 2-Die Set, Full-Length
- Dies Included: Full-length sizing die and bullet seater die
- Shellholder Compatibility: #5
- Construction: Hardened, polished steel
- Lock Rings: Sure-Loc split rings with wrench flats
- Warranty: No-Risk Lifetime Warranty
- Manufacturer Part Number: 546351
- UPC: 090255563511
What’s Included
- Full-length sizing die with Zip Spindle and elliptical expander
- Bullet seater die with floating alignment sleeve
- Two Sure-Loc lock rings
- Compartmentalized plastic storage box
- Instruction literature
Frequently Asked Questions
Does the Hornady Series I 300 PRC die set include a shell holder?
This Custom Grade Series I set does not include a shell holder, so you'll need to pick one up separately. It's set up to run with a #5 shellholder for 300 PRC. If you already reload, there's a good chance you have the right one on hand.
What dies come in this 300 PRC set?
You get two dies: a full-length sizing die and a bullet seater die. The sizer resizes your fired brass back to spec and decaps the primer, while the seater sets your bullet to the depth you want and can apply a crimp. Together they cover the core steps of loading a bottleneck rifle round.
What is the Zip Spindle on the Hornady sizing die?
The Zip Spindle has light threads cut into both the spindle and the collet. That lets you make fine decapping stem adjustments by turning it, or quickly zip it up and down for larger moves, then lock it securely without slippage. It takes the knuckle-busting out of tightening the spindle lock.
Will these Hornady dies work on my standard reloading press?
Yes, these use the standard 7/8-14 thread and fit the vast majority of single-stage and progressive presses on the market. The Sure-Loc lock rings let you set your adjustments and pull the dies in and out without losing your settings.





Reviews
There are no reviews yet.