Description
If you handload the .270 Winchester, this two-die set from Hornady covers the two jobs that matter most: knocking fired brass back into spec and seating bullets straight and true. It's part of Hornady's Custom Grade lineup, which starts life as hand-inspected steel and gets a mirror finish inside the sizing die so your cases come out smooth instead of scuffed. The set includes a full-length sizing die and a bullet seater die, which is everything most folks need to crank out quality .270 loads for hunting or range work.
What Sets the Hornady Series I .270 Die Set Apart
The full-length sizer runs Hornady's Zip Spindle design, with light threads cut into both the spindle and collet. That means it positively locks to kill off slippage, and when you need to adjust the decapping assembly you can fine-tune by turning the spindle or zip it up and down for bigger moves. The elliptical expander is another nice touch, sizing the neck with less friction and less case stretch than the old-school ball expanders, which translates to longer brass life and smoother strokes on the press.
Seating and Setup With the .270 Winchester 2-Die Set
The seater die aligns the bullet as it enters, so you get consistent seating depth and good concentricity round after round. It also has the ability to roll crimp when you want it. Both dies use 7/8-14 threads, so they fit any standard single-stage or progressive press, and the Sure-Loc lock rings clamp around the whole die body for constant pressure that holds your settings put.
Built to Outlast Your Press
Hornady backs these with their no-risk lifetime warranty, and they're honestly the kind of tool you set up once and use for decades. Keep in mind a shell holder is not included, so you'll want the correct one for the .270 family if you don't already have it on the bench. The whole set ships in a labeled, stackable plastic storage box that keeps everything organized between reloading sessions.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546300
- UPC: 090255563009
- Caliber: .270 Winchester (0.277" diameter)
- Series: Series I / Custom Grade
- Product Type: Full Length Die Set
- Die Type: Full-Length Sizing and Bullet Seating
- Number of Dies: 2
- Thread Size: 7/8-14
- Shell Holder Included: No
- Storage Box Included: Yes
- Length: 7.45 in
- Shipping Weight: 1.4 lbs
- Warranty: No-Risk Lifetime Warranty
What’s Included
- Full-length sizing die
- Bullet seating die
- Two Sure-Loc lock rings
- Plastic storage box
Frequently Asked Questions
Does the Hornady Series I .270 die set come with a shell holder?
No, this set includes the full-length sizing die and the seating die, but no shell holder. You'll need to pick up the correct shell holder for the .270 Winchester case head if you don't already have one on your bench. It uses the same head size as the .30-06 family, so many reloaders already have a compatible one.
Will these dies fit my reloading press?
Yes, both dies use the standard 7/8-14 thread, which is the industry standard for rifle dies. That means they'll thread right into any common single-stage or progressive press setup. If your press takes standard dies, you're good to go.
Can the seating die crimp the bullet?
The seater die can apply a roll crimp to help lock the bullet in place when you want it. For most .270 Winchester bolt-action loads, crimping isn't required, so you can set it up to seat only if you prefer. It's nice to have the option either way.
What makes the Zip Spindle design worth having?
The Zip Spindle positively locks to eliminate spindle slippage, which is a common headache with older die designs. Light threads cut into the spindle and collet let you make fine adjustments by turning the spindle or zip it up and down for larger moves. It takes the knuckle-busting out of tightening the spindle lock.




Reviews
There are no reviews yet.