Description
Stocking up your reloading bench for 10mm or .40-caliber handgun loads? These Hornady 180 grain FMJ-FP bullets are a staple for a reason. They run a .400 inch diameter projectile with a flat point profile and a full metal jacket that keeps the nose covered, so you get clean feeding through semi-autos and no exposed lead up front. For high-volume range sessions and practice loads, this is the kind of component that earns its spot in the bench drawer.
What Makes the Hornady 10mm 180 gr FMJ-FP Tick
The core here is cold swaged from pure lead, which gives you the kind of weight consistency and balance that translates to tighter groups on paper. Hornady wraps that core in a sturdy copper jacket designed to resist deformation and hold together through the barrel and into the target. The flat point nose profile isn't just about looks either. It feeds smoothly and punches cleaner holes in paper, which makes scoring easier when you're ringing out a target or shooting a match.
Dialing In Loads With the .400 180 Grain FMJ-FP
At 180 grains this is one of the most popular projectile weights for 10mm Auto and .40 S&W handloads. It carries a sectional density of .161 and a G1 ballistic coefficient of .188, giving you predictable flight for range distances. There's no cannelure on this bullet, so you'll set your own seating depth and crimp to suit your firearm and powder charge. As always, work up your loads from published data and keep things consistent.
Why Handloaders Keep Coming Back to Hornady FMJ-FP Bullets
Hornady's reputation in the reloading world is built on quality control and tight tolerances, and these FMJ bullets reflect that. They give you an affordable way to shoot more for the same effort at the press, whether you're grinding through practice drills, feeding a competition habit, or just keeping your 10mm fed. Buy a few boxes and you've got the makings of a whole lot of trigger time.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 40047
- UPC: 090255400472
- Bullet Caliber: 10mm (.40 Caliber)
- Bullet Diameter: .400 inch
- Bullet Weight: 180 Grain
- Bullet Type: Full Metal Jacket Flat Point (FMJ-FP)
- Jacket Material: Copper
- Core Material: Lead (cold swaged)
- Cannelure: No
- Sectional Density: .161
- G1 Ballistic Coefficient: .188
- Quantity: 100 Per Box
What’s Included
- 100 Hornady 10mm .400 180 gr FMJ-FP bullets
Frequently Asked Questions
What calibers can I load with these Hornady .400 180 gr FMJ-FP bullets?
These are .400 inch diameter projectiles, which makes them the right fit for both 10mm Auto and .40 S&W handloads. The 180 grain weight is one of the most common for both cartridges. Just match your load data to the specific cartridge you're building.
Do the Hornady 10mm FMJ-FP bullets have a cannelure?
No, these bullets do not have a cannelure. You'll set your own seating depth and apply a taper crimp appropriate for your firearm and load. This is standard practice for most semi-auto handgun reloading.
Are these bullets good for target and competition shooting?
Yes, this is exactly what they're built for. The flat point FMJ profile feeds reliably in semi-autos, punches clean holes in paper for easier scoring, and the cold swaged lead core delivers the consistency you want for range and match use. They're a go-to practice and competition component.
What's the difference between an FMJ-FP and a round nose bullet?
The flat point nose profile cuts cleaner, more defined holes in paper targets, which helps with scoring during matches. It also tends to feed well in most 10mm and .40 platforms. Round nose bullets feed a little slicker in some guns but leave less distinct holes on paper.




Reviews
There are no reviews yet.