Description
If you're loading Hornady's 190-grain 7mm A-Tip Match bullets, this little stem is the piece that makes the whole thing work the way it should. The A-Tip's long, precision-machined aluminum nose is sleeker and longer than any polymer tip out there, and a standard seating stem tends to bottom out on that slender point. When that happens, you end up pushing on the tip instead of contacting the ogive, which throws off your seating depth and can leave marks. This stem is cut to match the A-Tip's exact profile so it grips the bullet where it's supposed to.
What the 7mm 190gr A-Tip Stem Fixes at the Bench
Bullet seating sounds simple until a mismatched stem starts leaving annular rings on your bullets or pulling them a few thousandths as it withdraws. Because this stem is machined for the 190-grain A-Tip's ogive, it makes contact in the right spot, keeps the bullet lined up straight, and helps hold down your runout. For a bullet this focused on drag consistency and downrange accuracy, square seating is a big part of getting the performance you paid for.
Fitting the A-Tip Seating Stem to Your Die
Installation is about as easy as it gets. You pull the standard seating stem out of your Hornady Custom Grade seating die and thread this one in its place. Worth knowing up front: it's built specifically for Hornady Custom Grade dies and won't fit other manufacturers' dies, so keep that in mind if you're running a different brand of press setup.
Why Match Reloaders Reach for It
The A-Tip line was built around tight bullet-to-bullet consistency, and the seating stem is the one accessory Hornady calls out as necessary for optimal seating. The steel construction holds its shape load after load, and it's a small, affordable part that removes a real variable from your handloading process. For anyone chasing small groups at distance with the 190gr 7mm A-Tip, it's the right tool for the job.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 397142
- UPC: 090255971422
- Caliber: 7mm / .284
- Bullet Diameter: .284 in
- Bullet Weight: 190 Grain
- Compatible Bullet: A-Tip Match
- Compatible Dies: Hornady Custom Grade Seating Dies
- Function: Replacement Seating Stem
- Material: Steel
- Quantity: 1
What’s Included
- One Hornady A-Tip seating stem (7mm .284, 190gr)
Frequently Asked Questions
Why do I need a special seating stem for 7mm 190gr A-Tip bullets?
The A-Tip has a long, slender machined aluminum nose that bottoms out in a standard seating stem. When that happens, you seat the bullet by pushing on the tip instead of the ogive, which hurts seating depth consistency and can mar the bullet. This stem is cut to match the A-Tip profile so it contacts the ogive correctly.
Will this A-Tip seating stem fit my dies?
It's made specifically for Hornady Custom Grade seating dies. It is not compatible with other manufacturers' dies, so it won't drop into a Redding, RCBS, or other brand setup.
How do I install the A-Tip seating stem?
Just remove the standard seating stem from your Hornady Custom Grade seating die and thread this one in its place. No tools beyond what you already use for die adjustments, and no special setup is needed before you get back to loading.
Does this stem work with other 7mm bullets besides the 190gr A-Tip?
It's machined to match the ogive profile of the 7mm 190-grain A-Tip Match bullet specifically. If you're loading a different A-Tip weight or caliber, Hornady offers separate stems matched to those bullets, so you'll want the one that fits your projectile.




Reviews
There are no reviews yet.