Description
If you load 30 caliber ELD-X bullets and you're running a standard Hornady seating die, the factory stem wasn't cut for those streamlined polymer tips. This stem fixes that. It's machined to match the longer, pointier profile of the ELD-X so the bullet nose sits in the stem the way it should, which means straighter seating and no dinged-up meplats during the press stroke.
What the ELD-X Seating Stem Does Differently
The standard seating stem that ships in most dies contacts the ogive at a point that works fine for conventional spitzer bullets. ELD-X bullets have a more aggressive secant ogive and a Heat Shield tip, so a generic stem can contact them awkwardly. This one is cut to the correct profile, so contact happens where it should and the bullet goes in square. Cleaner alignment means less runout, and less runout generally means tighter groups downrange.
Fitting the 30 Cal Stem to Your Die
Installation is about as simple as reloading gear gets. You back out your seating die's seating plug, remove the original stem, thread this one in its place, and reset your seating depth. No special tools, no fuss. One important note worth repeating: these are built for Hornady Custom Grade dies and will not fit other brands, so keep that in mind if you're running RCBS, Redding, or Lee seating dies.
Bullet Coverage for the 178/200/220 Grain Range
This single stem covers three popular 30 cal ELD-X weights: the 178, 200, and 220 grain. That makes it a handy one-piece solution if you load a couple of different ELD-X bullets for your .308 Win, .300 Win Mag, .300 PRC, or .30-06. It's made in the USA and sold as a single stem, which is all you need since it swaps right into the die you already own.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397133
- UPC: 090255971330
- Caliber: 30 Cal (.308)
- Bullet Weights: 178 / 200 / 220 gr
- Bullet Profile: ELD-X
- Type: Seating Stem
- Die Compatibility: Hornady Custom Grade Dies
- Quantity: 1 stem
- Made in USA: Yes
What’s Included
- One Hornady ELD-X seating stem (397133)
Frequently Asked Questions
Will this ELD-X seating stem fit my seating die?
It's designed specifically for Hornady Custom Grade dies and threads right into the seating plug housing. It is not compatible with other manufacturers' dies, so it won't work in RCBS, Redding, Lee, or other brand seaters. If you're already running a Hornady seater, you're good to go.
Which bullets does the 30 Cal 178/200/220 gr stem actually work with?
This stem is profiled for Hornady ELD-X bullets in .308 diameter, covering the 178, 200, and 220 grain weights with one piece. It's shaped to match the ELD-X ogive and Heat Shield tip so those bullets seat cleanly. For the heavier 212 grain ELD-X you'd want the separate 397134 stem instead.
Why would I use this instead of the stem that came with my die?
The standard stem in most dies is cut for conventional spitzer bullets and doesn't match the longer, more streamlined ELD-X profile. Using a profile-matched stem improves contact and alignment, which reduces the chance of deforming the polymer tip and helps keep runout low. For precision loads, that consistency is worth the small upgrade.
How do I install the ELD-X seating stem?
Unscrew the seating plug on your Hornady Custom Grade die, back out the original stem, and swap this one in its place. Then reset your seating depth since the new stem contacts the bullet at a different point. It takes just a minute and needs no special tools.




Reviews
There are no reviews yet.