Description
The A-Tip Match line is Hornady's answer to the question every long-range reloader keeps asking: how do you squeeze more consistency out of every single bullet in the box? The 230 grain .30 caliber (.308 diameter) is the heavy hitter in the lineup, built around a long aluminum tip that does more than look sharp. Because the tip is precision machined rather than molded from polymer, it moves the center of gravity forward and sharpens in-flight stability, which is exactly what you want when the target is way out there and the wind is doing its thing.
What Sets the A-Tip Match Apart
Hornady's Ballistic Development Group spent years dialing in the ogive, bearing surface, tip length, and boattail on these. The result is a G1 ballistic coefficient of .823 and a G7 of .414, both verified with Doppler radar rather than guessed at on paper. One thing worth knowing about the A-Tip is that it was designed to be forgiving. The geometry plays nice across a range of twist rates, seating depths, and muzzle velocities, so you are not stuck chasing a razor-thin node to see what it can do. For the 230 grain, Hornady lists a minimum twist of 1:9 to stabilize it properly.
How the 230 gr A-Tip Match Is Packaged
This is where these bullets get interesting. Right off the press, they are packaged sequentially, one after another, without the bulk washing or tumbling most bullets go through. That minimal handling keeps the tips pristine and means every bullet in the box is as close to a clone of its neighbor as production allows. Since they skip the wash, there is a little oil film left behind, so Hornady includes a polishing bag in every 100 count box to buff them up before they hit your press.
Getting the Most Out of Them at the Bench
One heads-up for your loading setup: Hornady recommends their dedicated A-Tip seating stem for proper seating, since the long aluminum nose does not play well with a standard stem. With a sectional density of .346 and that high BC, the 230 grain .308 A-Tip is a natural fit for precision target work and match competition where every tenth of a group size counts.
Key Specifications
- Manufacturer: Hornady
- Model: A-Tip Match
- Manufacturer Part Number: 3091
- UPC: 090255230918
- Caliber: .30 Caliber
- Bullet Diameter: .308"
- Bullet Weight: 230 Grain
- Bullet Style: Aluminum Tip Boat Tail
- Ballistic Coefficient (G1): .823
- Ballistic Coefficient (G7): .414
- Sectional Density: .346
- Minimum Recommended Twist Rate: 1:9"
- Application: Target / Match
- Quantity: 100 per Box
What’s Included
- 100 Hornady A-Tip Match .30 Cal (.308) 230 gr bullets
- Bullet polishing bag
Frequently Asked Questions
What twist rate do I need for the 230 gr A-Tip Match?
Hornady lists a minimum recommended twist rate of 1:9 for the 230 grain .308 A-Tip Match. A 1:9 or faster barrel will stabilize this heavy, long projectile properly. If your rifle has a slower twist, you may not get the full accuracy potential out of it.
Do I need a special seating stem for these?
Yes, Hornady recommends their dedicated A-Tip seating stem for optimal seating. The long aluminum tip does not seat correctly with a standard stem and can get marred. Picking up the correct stem for your caliber is worth it to protect the nose and keep your seating depth consistent.
Why does the A-Tip Match come with a polishing bag?
These bullets are packaged sequentially right off the press without the bulk washing or tumbling most bullets go through, which keeps the tips undamaged and every bullet uniform. Skipping that wash leaves a light oil film behind. The included polishing bag lets you buff the bullets clean before loading them.
What makes the aluminum tip better than a polymer tip?
The aluminum tip is precision machined and runs longer than a typical polymer tip, which shifts the center of gravity forward and improves in-flight stability. It also will not degrade or deform from heat the way some polymer tips can. The payoff is a more consistent BC from bullet to bullet and tighter groups at distance.





Reviews
There are no reviews yet.