Description
The Hornady V-Max 6mm (.243) 65 grain is one of the most trusted names in varmint bullets, and for good reason. This is a component projectile for handloaders, built around a sharp polymer tip, a swaged lead core, and a concentric match grade jacket. Whether you are feeding a .243 Winchester, a 6mm Creedmoor, or another 6mm chambering, this bullet is engineered to deliver flat trajectories and consistent accuracy shot after shot.
What Makes the V-Max 65 Grain Tick
The real magic sits behind that red polymer tip. There is a hollow cavity between the tip's shaft and the bullet body, and on impact the hard tip drives back into the core and causes rapid, violent fragmentation. Hornady rates this expansion down to velocities as low as 1600 fps, so you get reliable terminal performance whether you are busting prairie dogs up close or reaching out on a windy afternoon.
Flat Shooting by Design
Hornady pairs the pointed polymer tip with a streamlined profile to push the ballistic coefficient up to roughly .280 (G1), with a sectional density of .157. That aerodynamic shape, combined with plenty of bearing surface, gives the bullet strong in-flight stability and a flatter arc than a lot of comparable varmint bullets. The .243 diameter bullet measures right around 2.6 inches in overall length and performs well in both fast twist varmint rifles and slower twist barrels.
Loading the 6mm V-Max
Since these are component bullets and not loaded ammunition, you will supply your own brass, powder, and primers. The match grade AMP jacket is drawn for concentricity, which translates to the kind of repeatable accuracy handloaders expect when they sit down at the bench. Folks who run these report tight groups and clean, dramatic performance on varmints and predators, which is exactly what this bullet was designed to do.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 22415
- UPC: 090255275018
- Caliber: 6mm (.243)
- Bullet Diameter: .243"
- Bullet Weight: 65 Grain
- Bullet Type: V-Max
- Tip Material: Polymer
- Jacket Material: Copper (Match Grade AMP)
- Core Material: Lead
- G1 Ballistic Coefficient: 0.280
- Sectional Density: 0.157
- Overall Length: 2.600"
- Application: Varmint
- Quantity: 100 Per Box
What’s Included
- 100 Hornady V-Max 6mm (.243) 65 grain polymer tip bullets
Frequently Asked Questions
Are these Hornady V-Max 6mm bullets loaded ammunition?
No, these are component bullets intended for handloading. You will need to supply your own brass, powder, and primers to assemble finished cartridges. They are not ready to shoot out of the box.
What is the ballistic coefficient of the 65 grain V-Max?
The 6mm .243 65 grain V-Max carries a G1 ballistic coefficient of about .280 and a sectional density of .157. That streamlined profile helps it buck wind and hold a flat trajectory at varmint ranges.
What cartridges can I load the 6mm V-Max in?
This .243 diameter bullet works in any 6mm chambering, including .243 Winchester, 6mm Creedmoor, 6mm Remington, and similar rounds. Always consult a current reloading manual for load data specific to your cartridge and components.
What is the Hornady V-Max 65 grain best suited for?
It is built as a varmint and predator bullet, delivering rapid, explosive fragmentation on impact. Hornady designs it to expand reliably at velocities as low as 1600 fps, so it performs across a range of distances.





Reviews
There are no reviews yet.