0
0

Hi-Viz TT1001 Tri-Viz Turkey/Deer Shotgun Sight Set – Green Fiber Optic

UPC: 613485585087

$26.99

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hi-Viz TT1001 Tri-Viz is a front-and-rear sight kit built to give bead-only shotguns a real aiming system without any gunsmithing. It uses three triangular green fiber optic LitePipes that form a bright, three-point sight picture your eye locks onto instantly. That triangular alignment does the heavy lifting for you, framing the target and leaving no guessing about where the pattern is headed. It also keeps your head down and planted on the stock, which is exactly where you want it when a tom steps out or a buck slips through the timber.

What the Tri-Viz Sight Set Does on Your Gun

The front sight replaces your removable front bead and takes four interchangeable green LitePipes: three triangular pieces in different heights plus one round pipe. Swapping those front pipes is how you dial elevation, so you can zero the gun to your load and your hold. The rear aperture mounts to the back of the rib and adjusts for windage with a simple turn of a screw. Between the two, you can micro-tune vertical and horizontal until you're dead on. When upland or waterfowl season rolls around, you can pull the rear sight and run the gun as a straight bird gun again.

Fitment and Install for the TT1001

This kit fits most vent-ribbed shotguns with ribs from 1/4 to 3/8 inch wide (6.3mm to 9.7mm) that use a removable front bead. That covers a huge range of Browning, Mossberg, Benelli, Beretta, Ruger, Winchester, and Remington models. The set ships with several screw sizes so you can match your specific gun, and installation is straightforward with the included hardware. A quick tip from folks who've mounted these: do the install over a towel or bench mat, since the tiny screw nuts love to bounce off and hide.

Why the Green LitePipes Earn Their Keep

The LitePipe system gathers ambient light and pipes it right to your eye, so the sights stay bright even under heavy canopy or on gray, overcast mornings. Hunters consistently note the sight picture is more visible than expected and easy to pick up in dim woods. The whole rig weighs next to nothing, so it won't change how your shotgun swings or balances. If you've got aging eyes or just want faster, more confident target acquisition on turkey and deer, this is a lot of upgrade for very little weight.

Key Specifications

  • Manufacturer: Hi-Viz
  • Manufacturer Part Number: TT1001
  • UPC: 613485585087
  • Product Type: Fiber Optic Sight Set
  • Configuration: Front and rear combo
  • LitePipe Color: Green
  • Front LitePipes Included: 4 (3 triangular, 1 round)
  • Elevation Adjustment: Adjustable via interchangeable front LitePipes
  • Windage Adjustment: Adjustable rear sight
  • Rib Width Compatibility: 1/4 to 3/8 inch (6.3mm to 9.7mm)
  • Fitment: Most vent-ribbed shotguns with removable front bead
  • Length: 6.6 inches
  • Weight: Approx. 0.05 lb
  • Warranty: Limited lifetime (LitePipes considered wear items)

What’s Included

  • Front sight base (replaces removable front bead)
  • Rear adjustable aperture sight
  • 4 green front LitePipes (3 triangular heights, 1 round)
  • 2 green rear LitePipes
  • Assorted installation screws for various shotgun models
  • Installation instructions

Frequently Asked Questions

Will the Tri-Viz TT1001 fit my shotgun?

It fits most vent-ribbed shotguns with a removable front bead and a rib width between 1/4 and 3/8 inch (6.3mm to 9.7mm). That includes common Browning, Mossberg, Benelli, Beretta, Ruger, Winchester, and Remington models. If you're unsure, measure your rib and confirm your front bead unscrews, then check Hi-Viz's shotgun application chart for your exact model.

Do I need to drill or tap my barrel to install the TT1001?

No. The front sight threads in where your removable bead was, and the rear aperture clamps to the back of the rib using the included screws. No drilling or tapping is required, which is a big reason this kit is popular with folks who don't want to send their gun to a gunsmith.

How do I adjust the Tri-Viz sight set for elevation and windage?

Elevation is set by swapping the three different-height triangular front LitePipes until your point of aim matches your point of impact. Windage is handled by the rear sight, which adjusts with a simple turn of a screw. Together they let you micro-tune both directions until the gun is dialed to your load.

How well do the green LitePipes work in low light?

The LitePipe system pulls in available light and channels it to your eye, so the green fiber optics stay bright even in shaded timber or on overcast mornings. Hunters regularly mention the sight picture is easier to pick up than expected in dim conditions. Keep in mind the LitePipes are a wear item and can be replaced down the road if needed.

Additional information

UPC

613485585087

Manufacturer

Manufacturer Part Number

TT1001

Color

GREEN

Elevation Adjustment

Adjustable

Length

6.6000

Product Type

Fiber Optic Bead

Shipping Weight

0.05

Style

Fiber Optic Sight Set

Reviews

There are no reviews yet.

Be the first to review “Hi-Viz TT1001 Tri-Viz Turkey/Deer Shotgun Sight Set – Green Fiber Optic”