Description
The factory drilled-and-tapped top of a Henry Long Ranger begs for a proper optic, and this HEGW14PR rail is the piece that gets you there. It's a one-piece Picatinny base machined specifically for the H014 series, so instead of fussing with separate two-ring mounts and worrying about alignment, you get a single solid platform that drops right onto the receiver. Cut to MIL-STD-1913 spec, it accepts both Picatinny and Weaver-style rings, which opens up just about any scope or red dot you'd want to run on a rifle this accurate.
What Makes the HEGW14PR Rail Worth Bolting On
Made in the USA for Henry by Evolution Gun Works, the rail is machined from domestic 6061 T6 aluminum and wears a matte black anodized finish that keeps glare down and shrugs off wear. At 5.094 inches long with full-length cross slots and a milled-out center channel to trim weight, it tips the scale right around two ounces. That length gives you real freedom to slide your rings fore and aft until the eye relief feels natural, which matters a lot when you're shouldering a lever gun that shoots like a bolt rifle.
Getting the Long Ranger Rail Mounted
Installation is about as painless as it gets. The rail uses your rifle's existing factory holes, and it comes complete with the mounting screws and a T-10 Torx bit right in the package. A drop of blue thread locker and 20 inch-pounds of torque on the screws is the recommended recipe, and you're set. Since it's a 0 MOA base, it's ideal for zeroing anywhere inside a few hundred yards, which covers how most folks actually hunt and shoot with the Long Ranger.
The channel down the middle does more than shave weight too. In many setups it leaves the factory iron sights usable, so you're not forced to give up your backup irons just to add glass. For a rifle known for punching tight groups, this is the honest foundation your optic deserves without adding bulk or fuss.
Key Specifications
- Manufacturer: Henry Repeating Arms (made by Evolution Gun Works)
- Manufacturer Part Number: HEGW14PR
- Model: Picatinny Rail
- UPC: 841370111954
- Fits: Henry H014 Long Ranger Series rifles
- Rail Type: One-piece Picatinny, MIL-STD-1913
- MOA: 0 MOA
- Material: 6061 T6 Extruded Aluminum
- Finish: Matte Black Anodized
- Overall Length: 5.094 in
- Height: 0.4 in (top of receiver to top of rail)
- Weight: 2 oz
- Ring Compatibility: Picatinny and Weaver-style rings
- Torque Spec: 20 in/lbs
- Mounting Hardware: Screws and T-10 Torx bit included
- Made In: USA
What’s Included
- Henry HEGW14PR one-piece Picatinny rail
- Mounting screws
- T-10 Torx bit
Frequently Asked Questions
Which rifles does the HEGW14PR Picatinny rail fit?
This rail is built specifically for the Henry H014 Long Ranger series. It mounts to the receiver using the factory drilled-and-tapped holes on those rifles. It is not designed for Big Boy, Golden Boy, or other Henry models, which use their own dedicated bases.
Does the Long Ranger rail come with mounting hardware?
Yes. The package includes the mounting screws and a T-10 Torx bit, so you have what you need to attach the base. EGW recommends a drop of blue thread locker and torquing the screws to 20 inch-pounds for a secure hold.
Can I still use my iron sights with this rail installed?
In many setups, yes. The rail has a milled channel down the center that, depending on your sight height, often leaves the factory irons usable. It is worth test-fitting to confirm your specific sight clearance before committing.
What kind of scope rings work with the HEGW14PR rail?
It is cut to MIL-STD-1913 Picatinny spec, so it accepts both Picatinny and Weaver-style rings. That gives you a wide range of options for mounting a scope or red dot. At 5.094 inches with full-length slots, you also get plenty of room to adjust ring position for proper eye relief.




Reviews
There are no reviews yet.