0
0

Henry H10 Protector Carbine .45-70 Govt 16.5in Threaded Lever Action

UPC: 619835100306

$980.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There has always been something reassuring about a .45-70 lever gun within arm's reach, and the Henry H10 Protector Carbine trims that idea down to a size that makes sense behind a truck seat, in a tree stand, or moving through timber. The 16.5 inch round blued steel barrel brings overall length to just 35.5 inches, so it shoulders quick and swings easy without giving up the deep-hitting punch that has kept the .45-70 Government relevant since 1873. Whether the job is hogs, bears, big-bodied deer, or simply keeping watch over property where help is a long way off, this carbine hits with authority out to 100 yards and beyond.

What Sets the H10 Protector Apart

The headline feature here is the factory 5/8×24 threaded muzzle. Pair it with a .45 caliber rated suppressor and you tame a good chunk of the blast and recoil impulse, which makes follow-up shots quicker and range days far more pleasant. Under the modern touches, though, this is still every bit a Henry. The stock is genuine American walnut with a checkered pistol grip, the receiver and barrel wear a deep blued finish, and the action runs with the smooth lever throw the company is known for. A ventilated rubber recoil pad and a 14 inch length of pull take the edge off stout hunting loads, and at right around 7 pounds the rifle carries all day without complaint.

Sights, Optics, and Feeding

Out of the box you get a fully adjustable semi-buckhorn rear sight with a diamond insert and a brass bead up front, a combo that is fast to pick up in low light and easy to zero. The receiver comes drilled and tapped for a Weaver 63B base, so adding a scope or red dot is a simple weekend project. The tubular magazine holds four rounds of .45-70, giving you 4+1 on tap, and factory-installed sling swivel studs mean it is ready for a sling the day you bring it home. The Protector Carbine is a working gun in the best sense, traditional where it counts and modern where it matters.

Key Specifications

  • Model: H10 Protector Carbine
  • Manufacturer Part Number: H010PGR-4570
  • UPC: 619835100306
  • Action: Lever Action
  • Caliber: .45-70 Government
  • Capacity: 4+1 Rounds (Tubular Magazine)
  • Barrel Length: 16.5 in, Round Blued Steel
  • Muzzle Threading: 5/8×24
  • Twist Rate: 1:20
  • Overall Length: 35.5 in
  • Weight: 7.0 lbs
  • Stock: American Walnut, Checkered Pistol Grip
  • Sights: Adjustable Semi-Buckhorn Rear, Brass Bead Front
  • Optics Ready: Receiver Drilled and Tapped (Weaver 63B)
  • Recoil Pad: Ventilated Rubber
  • Safety: Transfer Bar

What’s Included

  • Henry H10 Protector Carbine .45-70 Govt lever action rifle
  • Factory-installed sling swivel studs
  • Owner's manual

Frequently Asked Questions

Can I run a suppressor on the Henry H10 Protector Carbine?

Yes, the muzzle comes threaded 5/8×24 from the factory, which is a common standard for suppressor mounts and muzzle devices. Just make sure the can you choose is rated for .45-70 pressures and has a bore large enough to clear .458 diameter bullets, since most .30 caliber suppressors will not work. A properly rated suppressor cuts blast noticeably and softens the recoil impulse.

How many rounds does the H10 Protector Carbine hold?

The tubular magazine holds four rounds of .45-70 Government, and with one in the chamber you have five on tap. That is solid capacity for a big-bore carbine this compact, and each round carries serious energy.

Can I mount a scope or red dot on this rifle?

You can. The receiver comes drilled and tapped for a Weaver 63B base, so mounting a low-power scope or red dot is straightforward. If you prefer irons, the adjustable semi-buckhorn rear with diamond insert and brass bead front are quick to pick up and easy to zero.

How bad is the recoil on a 16.5 inch .45-70 like this?

The .45-70 has some push, no way around it, but the H10 Protector manages it better than you might expect. The ventilated rubber recoil pad and roughly 7 pound weight soak up a fair amount, and softer loads in the traditional pressure range are downright pleasant. Adding a suppressor to the threaded muzzle tames it further if you want an easier-shooting setup.

Additional information

UPC

619835100306

Manufacturer

Manufacturer Part Number

H010PGR-4570

Action

Barrel Finish

Blued

Barrel Length

16.5''

Caliber/Gauge

.45-70 Government

Capacity

4-Round

Color

Blue

Length

35.5''

Magazine Included

1 x 4-Round

Model

Product Type

Lever Action

Safety

Transfer Bar

Shipping Weight

7.8

Sights

Adjustable Rear/Bead Front

Thread Pattern

5/8"x24

Reviews

There are no reviews yet.

Be the first to review “Henry H10 Protector Carbine .45-70 Govt 16.5in Threaded Lever Action”