Description
The Griffin Armament Dual-Lok Mini Brake is one of those parts that quietly does two jobs at once. On its own it's a compact minimalist brake that keeps the muzzle flat and knocks down felt recoil, but the real trick is that it serves as the mounting interface for Griffin's Dual-Lok quick-detach suppressor system. This is the 6.5mm version cut for a 5/8×24 thread, which makes it a natural fit for 6.5 Grendel, 6.5 Creedmoor, .260 Remington, 6.5×47 Lapua and similar cartridges.
What Makes the Dual-Lok Mini Brake Different
The mounting design is where this thing earns its name. The brake carries 60 machined grooves, and the Dual-Lok collar has two locking positions offset by 3 degrees, which works out to 120 effective indexing points. That means when you thread your can on, it seats tight and repeatable with very little point-of-impact shift. There are no ratchets or wear-prone teeth to chew up over time, so the interface stays reliable round after round. The tapered seal also keeps gas out of the threads, which is a small detail that saves you headaches down the road.
Built Light, Built Tough
Machined from 17-4 PH stainless steel with a QPQ nitride finish, this brake is made to take heat and abuse while shrugging off corrosion. It tips the scale at right around 2.6 ounces and comes in under 1.5 inches long, so you're barely adding weight or length to the end of your barrel. Griffin also builds in a wear-resistant sacrificial baffle that helps extend the service life of your suppressor by taking the brunt of the blast.
Getting the Most Out of It
The Mini Brake works with Griffin's Dual-Lok Hub Mount and the dedicated Dual-Lok suppressor line, including the Dual-Lok 5, Dual-Lok 7, and the HRT series cans. Each brake ships with a shim set so you can time it correctly during install. Griffin has been building suppressors and muzzle devices out of Watertown, Wisconsin since 2005, and this piece carries that same reputation for solid, no-nonsense engineering.
Key Specifications
- Manufacturer: Griffin Armament
- Manufacturer Part Number: DLM65MM
- UPC: 689396838000
- Caliber: 6.5mm
- Thread Pitch: 5/8×24
- Material: 17-4 PH Stainless Steel
- Finish: QPQ Nitride
- Weight: 2.6 oz
- Length: Under 1.5 in
- Mounting System: Dual-Lok QD Interface
- Indexing Positions: 120 effective locking positions
- Device Type: Minimalist Muzzle Brake / Suppressor Mount
What’s Included
- Dual-Lok Mini Brake 6.5mm 5/8×24
- Shim set for timing
Frequently Asked Questions
Which suppressors does the Dual-Lok Mini Brake work with?
It interfaces with Griffin's Dual-Lok Hub Mount and the dedicated Dual-Lok suppressor line, including the Dual-Lok 5, Dual-Lok 7, and the HRT-556 and HRT-762 cans. Do keep in mind it is not intended for the PSR suppressor series. If you're running a Griffin Dual-Lok setup, this brake gives you a clean mounting point.
Do I need to time the Dual-Lok Mini Brake when I install it?
Yes, and Griffin makes that easy by including a shim set in the box. Shimming lets you index the brake correctly on your threads so it sits square and clocked the way it should. It's a standard process for most quality muzzle devices.
Will the 6.5mm version work on my 6.5 Creedmoor or 6.5 Grendel rifle?
Absolutely. The 6.5mm bore is tuned for cartridges like 6.5 Grendel, 6.5 Creedmoor, .260 Remington, and 6.5×47 Lapua on a 5/8×24 thread. Matching the bore to your caliber gives you the best braking and sound performance when you run a can.
How does the Dual-Lok mount stay tight without ratchets?
The brake has 60 machined grooves and the collar carries two locking positions offset by 3 degrees, giving 120 effective indexing points and a tapered gas seal. There are no wear-prone teeth or ratcheting parts, so the lock stays consistent over the long haul. That design also keeps point-of-impact shift low each time you remount.




Reviews
There are no reviews yet.