Description
Great Lakes Firearms builds these AR-10s in Michigan, and the GL10308SSTNG is a good example of why the brand keeps popping up in conversations about big-bore ARs that punch above their weight. The receivers are machined from billet 7075 aluminum rather than the usual forgings, and the whole thing gets dressed in a Tungsten gray Cerakote applied in-house by GLFA's own certified applicators. Paired with the bare 416R stainless barrel, the two-tone look stands out on a rack full of plain black rifles.
The Barrel Is Where This GLFA .308 Earns Its Keep
That 18 inch 416R stainless steel barrel is the heart of the rifle. It gets 5R rifling in a 1:10 twist, which handles the full spread of common .308 bullet weights, and it comes double thermally stress relieved and air gauged for consistency shot to shot. The rifle-length gas system with a .750 low-profile gas block softens the recoil pulse noticeably compared to shorter gas setups, which matters when you are sending .308 downrange all afternoon. The muzzle is threaded 5/8×24 and ships with a ported compensator, so swapping to your preferred brake or suppressor mount is simple.
Set Up the GL10308SSTNG Your Way
There are no sights on board, just a flat top Picatinny rail that flows into a 15.25 inch M-LOK handguard, giving you a long, uninterrupted mounting surface for a scope with proper eye relief plus room for a bipod, light, or hand stop. The mil-spec 6-position stock adjusts for different shooters and layers of hunting clothes, and the mil-spec trigger breaks in the 5.5 to 6 pound range. At 8.25 pounds and 38.5 inches collapsed, it carries fine for a .308 AR.
A Do-It-All .308 From Great Lakes Firearms
Whitetail, hogs, black bear, steel plates, or just stretching your legs past 500 yards, this rifle covers a lot of ground. It ships with a single 10-round magazine, so grab a couple extras and a scope and you are set.
Key Specifications
- Manufacturer: Great Lakes Firearms & Ammunition (GLFA)
- Model Number (MPN): GL10308SSTNG
- UPC: 638457791631
- Caliber: .308 Win / 7.62 NATO
- Action: Semi-Auto, Direct Impingement
- Barrel: 18" 416R Stainless Steel, 5R Rifling, Air Gauged
- Twist Rate: 1:10
- Muzzle Thread: 5/8×24 TPI with Ported Compensator
- Gas System: Rifle-Length, .750 Gas Block
- Receivers: Billet 7075 Aluminum, Tungsten Cerakote
- Handguard: 15.25" M-LOK, 6061 Aluminum
- Stock: Mil-Spec 6-Position Adjustable Synthetic
- Trigger: Mil-Spec, 5.5-6 lb Pull
- Capacity: 10+1
- Overall Length: 38.5" (Collapsed)
- Weight: 8.25 lbs
What’s Included
- Great Lakes GL10308SSTNG AR-10 rifle
- One 10-round detachable magazine
- Ported compensator (installed)
Frequently Asked Questions
Does the Great Lakes GL10308SSTNG come with sights?
No, this rifle ships optic ready with no iron sights. The flat top Picatinny rail and full-length M-LOK handguard give you plenty of real estate for a scope, red dot, or a set of backup sights. With an 18 inch .308 barrel, most owners top it with a low power variable or a 3-9x class hunting scope.
Is the GLFA AR-10 in .308 a good hunting rifle?
It is a strong pick for big game. The .308 Win handles whitetail, hogs, elk, and black bear at reasonable ranges, and the 18 inch stainless barrel with 5R rifling delivers the accuracy you want for clean shots. The rifle-length gas system also tames recoil, which makes follow-up shots quicker.
Can I put a suppressor or different muzzle device on this rifle?
Yes. The barrel is threaded in the standard 5/8×24 pitch used by most .30 caliber muzzle devices, and the factory compensator is hand tightened without thread locker, so removal is easy. That makes swapping to a suppressor mount or a different brake a five minute job.
What magazines does the Great Lakes AR-10 accept?
It ships with one 10-round magazine and runs on standard SR-25/DPMS pattern .308 AR magazines, which is the most common pattern on the market. Magpul PMAG 25 LR/SR mags and similar options are widely available and affordable, so building up a supply of spares is easy.




Reviews
There are no reviews yet.