Description
The Gemtech GM-45/Lunar-45 threaded rear mount adaptor is the part you need when you want to run your .45 caliber can on a fixed-barrel host instead of a tilting-barrel pistol. Standard GM-45 and Lunar-45 setups use a piston and booster assembly built for the recoil of a Browning-style pistol, but plenty of hosts like pistol-caliber carbines, sub guns, and threaded fixed-barrel builds don't need that booster movement. This adaptor screws into the rear of the suppressor and swaps that piston setup for a solid 5/8-24 thread interface, giving you a direct, no-slop connection.
Where the GM-45/Lunar-45 Rear Mount Adaptor Earns Its Keep
The 5/8-24 thread pitch is the go-to standard for .30 caliber rifle barrels, which is why this particular mount pairs so well with .300 AAC Blackout hosts. Worth calling out clearly: the GM-45 and Lunar-45 are rated for .300 Blackout with subsonic ammo only. This is not a supersonic-rated .30 cal can, so keep it fed with heavy subsonic loads and it'll do its job quietly and reliably. Running proper subsonic ammo also keeps you well inside the pressure and velocity window these aluminum-bodied cans were designed around.
Fit and Compatibility Notes for GM-45 Owners
This adaptor is built to fit the GM-45, Blackside, and Lunar-45 platforms, so if you already own one of these cans and a collection of Gemtech mounts, adding this thread mount is a straightforward way to expand what hosts you can run. The Lunar-45 in particular was designed to accept all the earlier Gemtech .45 caliber accessories, so the ecosystem plays nice together.
Installation is about as simple as it gets. Make sure the can is clean and clear, thread the adaptor into the rear of the suppressor, and torque it to spec. Since the GM-45 and Lunar-45 are largely aluminum, treat the threads with a little care during install and cleaning and this mount will give you years of dependable service on the range.
Key Specifications
- Manufacturer: Gemtech
- Manufacturer Part Number: 12194
- UPC: 609224347184
- Thread Pitch: 5/8-24
- Fit: GM-45 / Lunar-45 / Blackside
- Caliber Rating: .300 AAC Blackout (subsonic only)
- Color: Black
- Finish: Matte
- Product Type: Silencer Accessory / Rear Thread Mount
- Shipping Weight: 0.18 lb
What’s Included
- Gemtech GM-45/Lunar-45 threaded rear mount adaptor (5/8-24)
Frequently Asked Questions
What does the GM-45/Lunar-45 rear mount adaptor actually do?
It replaces the piston and booster assembly at the rear of your GM-45 or Lunar-45 suppressor with a fixed 5/8-24 threaded mount. That gives you a solid, direct-thread connection for fixed-barrel hosts that don't need the recoil-driven booster a tilting-barrel pistol requires. It's the standard way to move one of these cans onto a pistol-caliber carbine or sub gun.
Will this adaptor fit my Lunar-45 as well as a GM-45?
Yes. This mount is designed for the GM-45, Blackside, and Lunar-45 platforms, since they share the same rear thread interface. The Lunar-45 was built to accept the earlier Gemtech .45 caliber accessories, so if you own any of these cans you're covered.
Can I shoot supersonic .300 Blackout through the GM-45 or Lunar-45 with this mount?
No. These cans are rated for .300 AAC Blackout with subsonic ammunition only, not supersonic loads. Stick with heavy subsonic .300 BLK rounds to stay inside the pressure and velocity range these aluminum-bodied suppressors were engineered for.
Is the 5/8-24 thread the right size for a .300 Blackout barrel?
It is. 5/8-24 is the common thread pitch for .30 caliber rifle barrels, which is exactly why this mount is offered in that pattern for .300 Blackout hosts. Just confirm your barrel is threaded 5/8-24 before ordering and you're set.






Reviews
There are no reviews yet.