Description
The Forster 6mm Dasher Full Length Sizing Die is built for handloaders who care about every thousandth. This is a single sizing die from Forster's Bench Rest line, and it handles the full job in one stroke: it sizes the case neck, shoulder, and body, bumps the shoulder to set proper headspace, deprimes the spent primer, and expands the neck on the way back out. The result is brass that drops back into a minimum SAAMI chamber with a clean, repeatable fit every time.
What sets Forster apart is how these dies are made. They start with high quality steel, machine it to very tight tolerances using one-piece reamers for true concentricity between every diameter, then heat treat and hand polish the interior both before and after hardening for an extra smooth finish. That smooth bore is part of why so many precision guys trust Forster to turn out concentric rounds load after load.
Why the 6mm Dasher Sizing Die Earns Bench Space
The standout here is Forster's exclusive elevated E-Z Out expander ball. Instead of yanking the neck out of alignment on the upstroke the way some expander setups do, the raised position keeps case necks concentric during the expanding operation. For a wildcat-turned-competition favorite like the 6 Dasher, where accuracy is the whole point, that detail matters. A precisely positioned vent hole in the die body also lets trapped air and lube escape so you don't ding your cases or the die.
Setting Up Your Forster 6mm Dasher Die
This die threads into any standard 7/8-14 press and uses the Forster Cross Bolt locking ring, which clamps the split ring evenly rather than driving a set screw into the die threads. Keep in mind a shellholder is not included, so grab the right one for the Dasher if you don't already have it, and lube your cases before sizing. Full length sizing is the move after each firing or whenever brass flow calls for bringing the case fully back to size, making this a solid foundation for a bolt gun or any Dasher build where consistency is king.
Key Specifications
- Cartridge: 6mm Dasher
- Die Type: Full Length Sizing Die
- Die Series: Bench Rest
- Gun Type: Rifle
- Thread: 7/8-14
- Material: Case Hardened Steel
- Locking Ring: Forster Cross Bolt
- Expander System: Elevated E-Z Out Expander Ball
- Manufacturer: Forster Products
- Manufacturer Part Number: 005266
- UPC: 757253999338
- Country of Origin: USA
What’s Included
- One Forster 6mm Dasher Full Length Sizing Die with decapping and expander unit
- Cross Bolt die locking ring
- Instructions
Frequently Asked Questions
Does the 6mm Dasher sizing die come with a shellholder?
No, a shellholder is not included with this die. You'll need the correct shellholder for the 6mm Dasher to run it in your press. If you're already loading the Dasher or a parent case in that family, there's a good chance you have the right one on hand.
Is this a bushing die or a standard full length sizing die?
This is Forster's standard Bench Rest full length sizing die, not a bushing die. It sizes the neck, shoulder, and body in one pass and uses the elevated E-Z Out expander ball to control neck tension and keep necks concentric. If you want to control neck tension with interchangeable bushings, Forster offers a separate Bushing Full Length die.
What exactly does this Forster die do to my brass?
In a single stroke it sizes the case neck, shoulder, and body, bumps the shoulder back to set correct headspace, deprimes the spent primer, and expands the neck as the case comes out. That returns fired brass to a minimum SAAMI dimension so it chambers cleanly and consistently. It's the workhorse die most precision reloaders build their setup around.
Will this die fit my reloading press?
Yes, it uses the standard 7/8-14 thread found on virtually all single stage and turret presses. It also comes with the Forster Cross Bolt locking ring, which clamps the split ring evenly instead of digging a set screw into the die body. Just lube your cases before sizing and you're good to go.





Reviews
There are no reviews yet.