Description
Every reloader eventually hits that moment where a case wedges itself solid in a sizing die, usually right when things are going smoothly. The Frankford Arsenal Platinum Stuck Case Remover is built to get you out of that jam fast. It's a vise-style clamp tool that attaches directly to your press using the built-in shell holder, then grips the case rim so you can use the press lever to pull the case free. No disassembling the die, no drilling and tapping the case head, and no digging through the toolbox for an afternoon.
How the Platinum Stuck Case Remover Works
The design is about as straightforward as it gets. You insert the remover into the shell holder of your single stage press, clamp the screw down firmly onto the stuck case, and then run the press lever. That motion uses the full mechanical advantage of the press to separate the case from the die cleanly. Once the case breaks loose, you pull the tool off and get right back to loading. The adjustable clamp opens and closes to grab the rim securely, which is what makes it so repeatable compared to older methods.
Multi-Caliber Coverage in One Tool
The adjustable clamp on this remover handles a wide spread of cartridges, working with sizes from .17 Remington all the way up to .338 Lapua Magnum. That range covers the vast majority of pistol and rifle brass most folks run on a bench, so one tool stays useful no matter what you're loading that day. It's built from steel for the kind of strength you want when you're putting real leverage on a stubborn case.
Built for the Bench
At roughly 8.3 inches long and under a pound, it's compact enough to tuck into a drawer or sit near the press without crowding your workspace. The rugged construction holds up to repeated use, and since it leans on your press for the heavy lifting rather than requiring special tools, it's one of those tools you buy once and keep around for years. Anyone who runs a sizing die regularly will be glad it's within reach the day they need it.
Key Specifications
- Manufacturer: Frankford Arsenal
- Model: Platinum Series Stuck Case Remover
- Manufacturer Part Number: 1078192
- UPC: 661120411338
- Function: Stuck Case Remover
- Caliber Range: .17 Rem to .338 Lapua
- Caliber/Gauge: Multi-Caliber
- Design: Adjustable screw clamp, vise style
- Material: Steel
- Press Compatibility: Single stage reloading presses
- Attachment: Mounts to press via shell holder
- Length: 8.3 in
- Weight: 0.62 lbs
What’s Included
- Frankford Arsenal Platinum Series Stuck Case Remover
Frequently Asked Questions
How does the Platinum Stuck Case Remover actually free the case?
You insert the tool into your press shell holder, clamp the adjustable screw down onto the rim of the stuck case, and then run the press lever. The motion uses the press's mechanical advantage to pull the case free from the die. Once it breaks loose, you remove the tool and keep loading.
Do I need to remove or adjust my sizing die to use this?
No. One of the main perks of this tool is that your die stays right where it is. You don't have to disassemble the press or break out any additional tools to get the job done.
What cartridge sizes does the Stuck Case Remover work with?
The adjustable clamp covers a broad range, working with cases from .17 Remington up to .338 Lapua Magnum. That spread includes most common pistol and rifle brass, so it stays useful across different loads on your bench.
Will it fit my press?
The remover is designed for single stage reloading presses and attaches using the press's standard shell holder. As long as your press takes a shell holder, this tool mounts up and leverages that setup to pull the case.




Reviews
There are no reviews yet.