Description
If you run a Forster Original or Power Case Trimmer, the Collet #1 is the piece most reloaders reach for first. It's built on Forster's Brown & Sharpe-style tapered design, which grips the case by the rim and pulls it snug without letting it walk backward during the cut. That consistent hold is a big part of why Forster trimmers earn their reputation for repeatable, square case mouths batch after batch.
Collet #1 covers three step dimensions, .379 inch, .473 inch, and .532 inch, which lets a single collet handle a wide swath of popular rifle brass. The .473 step is the one most handloaders care about, since that's the standard case head for the .308 Winchester and 7.62 NATO family, along with cartridges like the .30-06, .270, and .25-06. Smaller cases such as the .204 Ruger, .223-based wildcats, and a handful of others also index off this collet depending on their rim size.
Why the Collet #1 Earns Its Keep
The whole idea behind Forster's collet system is that the case gets held by the rim rather than clamped in a shell holder, so variations in rim diameter don't throw off your trim depth. Machined from steel and hand-finished for smooth operation, this collet is a long-term part that'll outlast a lot of the brass you run through it.
Picking the Right Forster Collet
Forster's Original and Power trimmers use collets #1 through #4, and these are not interchangeable with the #5 through #8 collets made for the Classic trimmer. Collet #1 is the most commonly used of the bunch, so if you're building out a trimming setup or replacing a worn or lost piece, this is usually the one. If your particular case head doesn't fall in the #1 range, Forster's collet chart will point you to the right number based on your rim measurement.
Key Specifications
- Manufacturer: Forster Products
- Model: Collet #1
- Manufacturer Part Number: CT2001
- UPC: 757253003875
- Compatibility: Forster Original & Power Case Trimmer
- Collet Type: Brown & Sharpe-style tapered
- Step Dimension A: 0.379 in
- Step Dimension B: 0.473 in
- Step Dimension C: 0.532 in
- Material: Steel
- Country of Origin: USA
- Quantity: 1 collet
What’s Included
- One Forster Collet #1 (CT2001)
Frequently Asked Questions
Which case trimmers does the Forster Collet #1 fit?
Collet #1 is made for the Forster Original and Power Case Trimmers. It is not compatible with the Classic Case Trimmer, which uses the #5 through #8 collets. Collets #1 through #4 and #5 through #8 are not interchangeable between those trimmer models.
Does the Collet #1 work with .308 Winchester and 7.62 NATO brass?
Yes. The .473 inch step on Collet #1 matches the standard case head used by the .308 Winchester and 7.62 NATO family, along with cartridges like the .30-06, .270, and .25-06. It's the collet most handloaders reach for when trimming that common rifle brass.
How does the Forster collet hold the case?
It uses a Brown & Sharpe-style tapered design that grips the case by the rim and closes on it securely without pulling the case back during the cut. Because the case is held by the rim rather than a shell holder, small differences in rim diameter don't change your trim depth, which is key to repeatable, consistent case lengths.
How do I know if Collet #1 is the right one for my cartridge?
Measure your case diameter at the rim and compare it to Forster's collet step chart. Collet #1 covers .379, .473, and .532 inch steps, which handles a large portion of common rifle cases. If your case head doesn't fall in that range, the chart will direct you to collet #2, #3, or #4.




Reviews
There are no reviews yet.