Description
Checking headspace on a .22 rimfire isn't guesswork when you've got the right tool in hand. This Forster No-Go gage is machined from hardened steel and honed for the .22 LR and .22 Short family, giving you a repeatable reference for how deep your chamber runs. On rimmed cartridges like the .22 rimfire, the No-Go represents the maximum recommended chamber length, so it's the go-to check for spotting a chamber that has stretched beyond where it should be.
How the 22 No-Go Gage Reads Your Chamber
Using it is straightforward. With the bolt working freely in the receiver, drop the gage into the chamber and gently try to close the action. The bolt should stop or show clear resistance before it locks up. If it closes fully on the No-Go, the chamber may have excessive headspace and deserves a closer look before you run ammo through it. Never force a bolt closed on a gage, and for the cleanest feel on a bolt gun, pull the extractor so nothing throws off your reading.
Why the Forster No-Go Earns Bench Space
Forster has been grinding gages to ANSI and SAAMI tolerances since 1935, and this one carries the same reputation for accuracy that gunsmiths and home builders lean on. Each gage has the caliber and gage type printed right on the side, so there's no mixing it up mid-project. It's an intermediate length between the GO minimum and the FIELD maximum, which makes it the standard reference point when you're fitting a barrel or evaluating a rifle with unknown history.
Whether you're headspacing a fresh barrel, inspecting a used .22, or just want peace of mind before a range trip, this gage does one job and does it right. Pair it with a Forster GO gage for the full picture, and you'll know exactly where your chamber sits.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG22RIMN
- UPC: 757253004612
- Caliber: 22 LR / 22 Short Rimfire
- Gage Type: No-Go
- Gage Family: Rimmed and Belted
- Material: Hardened Steel
- Color: Steel
- Tolerance Standard: ANSI / SAAMI
- Length: 0.046"
- Quantity: 1
What’s Included
- One Forster 22 Rimfire No-Go headspace gage
Frequently Asked Questions
What does it mean if the bolt closes on the 22 No-Go gage?
If your bolt closes fully on the No-Go gage, the chamber may have excessive headspace and shouldn't be fired until it's checked further. On rimfire, the No-Go marks the maximum recommended chamber length, so a full close is your signal to investigate. The next step is to verify with a FIELD gage to see how far out of spec it really is.
Does this gage work for both 22 LR and 22 Short?
Yes. This gage is honed for the .22 rimfire family, which covers .22 Short, .22 Long, .22 LR, and .22 LR Match chambers. They all share the same rim-based headspace reference, so one gage handles the group.
Do I need a GO gage too, or is the No-Go enough on its own?
For a complete headspace check you really want both. The GO gage confirms the chamber is long enough to accept properly sized ammo, while the No-Go confirms it isn't too long. Most gunsmiths set headspace so the bolt closes on the GO and stops short of closing on the No-Go.
Should I remove the extractor when using the Forster No-Go gage?
On a bolt-action rifle, pulling the extractor gives you the truest feel because nothing catches the gage rim or fights the bolt. The bolt needs to work freely for an accurate read. Whatever you do, never force the bolt closed on a gage.



Reviews
There are no reviews yet.