0
0

Forster Bushing Full Length Sizing Die Kit – 6 GT (3 Bushings)

UPC: 757253990212

$131.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6 GT has become one of the go-to cartridges for PRS and NRL competition, and getting the most out of it starts at the reloading bench. This Forster Bushing Full Length Sizing Die Kit lets you control neck tension with real precision while still full-length sizing the case body and bumping the shoulder back to spec. Instead of forcing your brass through a fixed neck diameter, you swap in whichever bushing matches your setup, which means less overworking of the neck and better case life down the road.

What Sets the Forster 6 GT Bushing Die Apart

Forster builds these dies with an etched reference line and their Accu-Ring lock ring, which gives you incremental reference marks for making fine shoulder bump adjustments in 0.001 inch steps. That makes repeatable setup a whole lot easier whether you are tuning for the first time or coming back to the press after swapping components. The die sizes the shoulder and body down just enough to chamber cleanly in a minimum-spec rifle chamber, and the bushing handles the neck, so you end up with concentric, consistent ammo.

Picking the Right Bushing for Your Brass

The kit ships with three neck bushings sized .264, .266, and .268, which cover the most common needs for 6 GT reloaders right out of the box. The trick is to measure a loaded round at the neck, then subtract for the spring back you want. Roughly 0.001 inch of neck tension works well for a bolt gun not feeding from the magazine, while 0.002 inch suits rounds cycling through a magazine. If you land between the included sizes or want to experiment, Forster bushings are sold separately so you can build out a range.

Who This Kit Is Built For

Bushing dies reward reloaders who want hands-on control over bullet grip, so this one lands squarely with precision and competition folks running 6 GT. Partial neck sizing is more of an intermediate to advanced technique, but the payoff is tighter tuning and brass that lasts longer. Pair it with a quality seater and you have the foundation for some seriously accurate loads.

Key Specifications

  • Cartridge: 6 GT (6mm GT)
  • Die Style: Bushing Full Length Sizing Die
  • Included Bushings: .264, .266, .268
  • Bushing Increments: 0.001 inch
  • Lock Ring: Accu-Ring with reference marks
  • Reference Feature: Etched full-height reference line
  • Function: Sizes neck, shoulder, and body; bumps shoulder for headspace
  • Material: Steel
  • Brand: Forster Products
  • Manufacturer Part Number: FBK4277
  • UPC: 757253990212
  • Shipping Weight: 0.5 lbs

What’s Included

  • Forster Bushing Full Length Sizing Die with Accu-Ring (6 GT)
  • Three neck bushings (.264, .266, .268)

Frequently Asked Questions

What bushings come with the Forster 6 GT Bushing Full Length Sizing Die Kit?

The kit includes three neck bushings sized .264, .266, and .268. Forster's staff pre-selects these as the sizes most 6 GT reloaders tend to need. If you want a different diameter for your specific brass and bullet combo, Forster bushings are available separately.

How do I choose the right bushing size?

Measure the neck diameter of a loaded round, then subtract the amount of neck tension you want. About 0.001 inch of spring back works for a bolt gun that isn't feeding through the magazine, and around 0.002 inch suits rounds cycling through a magazine. That gives you a target bushing diameter to start with before fine-tuning.

Does this die full-length size or just the neck?

It does both. The die sizes the case body, bumps the shoulder back to set correct headspace, and uses the bushing to size the neck, so you get full-length sizing with precise control over neck tension. The bushing approach also limits how much the neck gets worked, which helps extend case life.

Do I need a shellholder to use this die?

That depends on your press. If you're running a Forster Co-Ax press, shellholders aren't required. In any other press, use the shellholder recommended by your press manufacturer.

Additional information

UPC

757253990212

Manufacturer

Manufacturer Part Number

FBK4277

Shipping Weight

0.5

Reviews

There are no reviews yet.

Be the first to review “Forster Bushing Full Length Sizing Die Kit – 6 GT (3 Bushings)”