0
0

Forster 6mm Creedmoor Bushing Full-Length Die Set & Ultra Micrometer Seater

UPC: 757253990434

$230.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Precision handloaders know the two things that make or break a 6mm Creedmoor load are consistent neck tension and repeatable seating depth. This Forster set tackles both. You get a Bushing Full Length Sizing Die paired with the Bench Rest Ultra Micrometer Seater Die, plus three interchangeable neck bushings to dial everything in. The sizing die works the case body and bumps the shoulder in a single stroke while the bushing limits how much the neck gets worked, so your brass fits a minimum-spec chamber without being over-sized every pass.

What the Forster Bushing Full-Length Die Brings to the Bench

The bushing design is the heart of this setup. Instead of a fixed neck diameter and an expander ball dragging through every case, you drop in the bushing that matches your brass. The general rule of thumb is to pick a bushing roughly .002 inch under your loaded round's measured neck diameter, which gives you solid grip without crushing the brass. This set ships with .270, .272, and .274 bushings for 6mm Creedmoor, and since Forster offers them in .001 inch steps, you can fine-tune neck tension to match your specific brass and chamber. The sizing die includes an etched reference line and an Accu-Ring to help you repeat your setup.

Dialing Seating Depth with the Ultra Micrometer Seater

The Ultra Micrometer Seater is a non-crimping die that keeps the bullet and case in alignment while the bullet is press-fit seated, which is where a lot of runout problems get solved. The micrometer head adjusts in either direction down to .0005 inch, and the bright white markings make it easy to read under bench lighting. Once you find your node, note the number, lock it down, and you can return to that exact seating depth load after load.

Built the Way Forster Builds Everything

Forster machines these dies to tight concentricity standards, and the neck bushings get a smooth interior finish that makes sizing feel effortless. Everything comes packaged in the Deluxe Die Box. This is a reloading-room upgrade for folks chasing single-digit standard deviations and brass that lasts, and it threads into any standard 7/8-14 press or the Forster Co-Ax.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: UFB4331
  • UPC: 757253990434
  • Caliber: 6mm Creedmoor
  • Die Type: Bushing Full Length Sizing Die & Ultra Micrometer Seater Die
  • Included Bushings: .270, .272, .274
  • Bushing Increments: .001 inch steps available
  • Micrometer Adjustment: Adjustable in either direction to .0005 inch
  • Seater Style: Non-crimping, press-fit straight-line seating
  • Sizing Die Features: Etched reference line and Accu-Ring
  • Thread: Standard 7/8-14
  • Country of Origin: USA
  • Packaging: Deluxe Die Box

What’s Included

  • Forster Bushing Full Length Sizing Die with Accu-Ring
  • Forster Bench Rest Ultra Micrometer Seater Die
  • Three neck bushings (.270, .272, .274)
  • Deluxe Die Box

Frequently Asked Questions

What bushings come with the Forster 6mm Creedmoor die set?

The set includes three neck bushings sized .270, .272, and .274 for 6mm Creedmoor. Forster offers additional bushings in .001 inch increments if you need to fine-tune neck tension for your particular brass. A good starting point is a bushing about .002 inch smaller than your loaded round measures at the neck.

How precise is the Ultra Micrometer Seater Die?

The micrometer head adjusts in either direction down to .0005 inch, and the white markings make it easy to read. Once you dial in your seating depth, you can record the setting and return to it load after load. It's a non-crimping die that keeps the bullet and case aligned while the bullet is press-fit seated.

Will this die set fit my press?

Yes. Both dies use the standard 7/8-14 thread, so they install in any common single-stage or turret press. They also work great in the Forster Co-Ax press if you run one.

Do I still need an expander with the bushing sizing die?

Not necessarily. The whole point of the bushing design is to size the neck without dragging an expander ball through it, which reduces how much the brass gets worked. Some handloaders prefer to follow up with a separate expander mandrel for final neck sizing, but that's a personal preference rather than a requirement.

Additional information

UPC

757253990434

Manufacturer

Manufacturer Part Number

UFB4331

Shipping Weight

1.505

Reviews

There are no reviews yet.

Be the first to review “Forster 6mm Creedmoor Bushing Full-Length Die Set & Ultra Micrometer Seater”