Description
The Forster Bushing Full Length Sizing Die in 6mm GT is built for reloaders who want to fine-tune neck tension instead of settling for whatever a standard die gives them. It sizes the case body, bumps the shoulder back to set headspace, and sizes the neck using an interchangeable bushing you select. The result is brass that fits your chamber snugly while giving you repeatable, controlled neck tension round after round.
The idea behind a bushing die is simple but it makes a real difference at the loading bench. By swapping bushings in small increments, you control exactly how much the neck gets worked. That means you only squeeze the neck down as far as you need to, which helps keep necks concentric and extends the useful life of your 6mm GT brass. It's a favorite approach among precision and competition folks running the GT, since consistent neck tension is one of the biggest contributors to low velocity spread.
What Sets the 6mm GT Bushing Die Apart
Forster machines these dies by hand with one-piece reamers and builds them from quality steel, which is a big reason they have the reputation they do. The bushing floats slightly inside the die, letting it self-align to the case neck for better concentricity. There's an etched reference line and Forster's lock ring system so you can return to your exact setting every time you thread it back into the press.
Fitting the Die to Your Setup
This die uses the standard 7/8-14 thread, so it drops right into a conventional press, and it works in a Forster Co-Ax as well. One thing worth knowing up front: this is the die only, so the neck bushing is not included and needs to be purchased separately. Pick your bushing size based on the outside neck diameter of a loaded round, generally running about two thousandths under that measurement to land on the right neck tension for your load.
Whether you're loading for a match gun or just chasing tighter groups at the range, this die gives you the kind of control over your 6mm GT brass that keeps your ammo consistent and your cases lasting longer.
Key Specifications
- Caliber: 6mm GT
- Die Type: Bushing Full Length Sizing Die
- Function: Sizes neck, shoulder, and body with controlled shoulder bump
- Bushing: User-selectable, not included (sold separately)
- Thread: 7/8-14 standard; also fits Forster Co-Ax press
- Adjustment: Etched reference line and lock ring
- Material: Quality steel, hand machined with one-piece reamers
- Manufacturer: Forster Products
- Manufacturer Part Number: FBD4277
- UPC: 757253990229
- Shipping Weight: 0.45 lb
What’s Included
- One Forster Bushing Full Length Sizing Die (6mm GT)
- Die lock ring
- Die box
Frequently Asked Questions
Does the 6mm GT bushing die come with bushings?
No, this is the standalone die and the neck bushing is sold separately. That lets you choose the exact bushing size for your brass and preferred neck tension. If you'd rather have bushings included, Forster also offers a kit version that ships with three bushings.
How do I pick the right bushing size for this die?
Measure the outside neck diameter of a loaded, seated round and subtract about two thousandths of an inch. That number gets you to a good starting neck tension for most loads. Forster bushings come in one-thousandth increments, so you can fine-tune from there based on how your 6mm GT shoots.
What's the advantage of a bushing die over a standard full length sizer?
A standard die sizes the neck a fixed amount, while a bushing die lets you control exactly how much the neck is worked. Sizing the neck only as far as needed keeps necks more concentric, delivers more consistent neck tension, and helps your brass last longer. That consistency is a big deal for precision and competition loads.
Will this die work in a standard reloading press?
Yes. It uses the common 7/8-14 thread and drops right into a conventional single-stage press, and it also works in a Forster Co-Ax press. You'll want the correct shell holder for your press if you're not running the Co-Ax.




Reviews
There are no reviews yet.