0
0

Forster 6.5 Creedmoor Bushing Full Length Sizing Die (FBD4271)

UPC: 757253990649

$99.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Bushing Full Length Sizing Die is built for 6.5 Creedmoor handloaders who want real control over neck tension without giving up full-length sizing. Drop in the bushing of your choice and the die sizes the case body, bumps the shoulder back to set headspace, and only works the neck as much as the bushing allows. That combination keeps your brass concentric and fitting a minimum-spec chamber while taking it easy on the neck, which is where a lot of case life gets won or lost.

How the 6.5 Creedmoor Bushing Full Length Die Earns Its Keep

Because the neck is sized down just enough rather than crushed and re-expanded, you avoid overworking the brass and the work hardening that comes with it. The interchangeable bushings come in .001 inch increments, so you can fine-tune bullet grip to match your brass neck wall thickness and the fit your rifle likes. A common starting point is picking a bushing roughly .002 inch under the neck diameter of a loaded round, then adjusting from there once you see how your brass behaves.

Fit, Feel, and Setup Notes for the Forster Full Length Bushing Die

Like the rest of Forster's Bench Rest line, this die is hand-polished inside for smooth, consistent sizing stroke after stroke. It threads into any standard 7/8-14 press, and if you're running a Forster Co-Ax you won't need a shellholder at all. The die includes a decapping assembly with an expander ball to deprime as you size. One thing worth knowing up front: this is the standalone die, so the neck bushings are purchased separately and let you build out your tension options over time.

For precision rifle folks, long-range target work, or anyone chasing tighter groups out of their 6.5 Creedmoor, this is one of those tools that pays off every time you pull the handle. It's a favorite starting point for reloaders moving into bushing dies because of the flexibility it gives you right out of the box.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: FBD4271
  • UPC: 757253990649
  • Cartridge: 6.5mm Creedmoor
  • Die Type: Bushing Full Length Sizing Die
  • Function: Sizes neck, body, and bumps shoulder
  • Thread: Standard 7/8-14
  • Bushing Increments: .001 inch
  • Bushings Included: No, sold separately
  • Decapping: Includes decapping assembly with expander ball
  • Shipping Weight: 0.52 lb

What’s Included

  • Forster 6.5 Creedmoor Bushing Full Length Sizing Die
  • Decapping assembly with expander ball
  • Instructions

Frequently Asked Questions

Are bushings included with the Forster 6.5 Creedmoor Bushing Full Length Die?

No, this is the standalone die and the neck bushings are sold separately. Forster offers them in .001 inch increments so you can dial in the exact neck tension you want. If you'd rather get a set out of the gate, Forster also makes a kit version that ships with three bushings.

What bushing size should I start with for 6.5 Creedmoor?

A good rule of thumb is to measure the neck diameter of a loaded round and pick a bushing about .002 inch smaller than that. From there you can go up or down a thousandth to tune bullet grip to your brass and rifle. Since neck wall thickness varies by brass brand, it's worth confirming the measurement on the cases you're actually loading.

Does this die deprime and set the shoulder too?

Yes. It full-length sizes the case body, bumps the shoulder back to set your headspace, and deprimes with the included decapping assembly, all in one stroke. The bushing controls how much the neck gets sized, so you get the benefits of a full-length die without overworking the neck.

Will the Forster Bushing Full Length Die work in my press?

It threads into any standard 7/8-14 reloading press, so it'll fit the vast majority of single-stage setups out there. If you run a Forster Co-Ax press, you won't even need a shellholder since the Co-Ax doesn't use one.

Additional information

UPC

757253990649

Manufacturer

Manufacturer Part Number

FBD4271

Shipping Weight

0.52

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5 Creedmoor Bushing Full Length Sizing Die (FBD4271)”