Description
Most micro compact 9mms run striker-fired systems, and their triggers tend to feel like it. FN went a different direction with the Reflex and built it around an internal hammer, which is why the single action only trigger breaks so clean for a gun this size. Pull weight lands in the 4.5 to 5.5 pound range with a short, crisp break, and anyone who has run one next to the usual micro compact suspects tends to notice the difference on the first magazine. This version pairs that trigger with an ambidextrous manual safety for folks who want a thumb lever backing up the internal passive safeties.
Built for Carry, Set Up for a Red Dot
The MRD slide comes milled for micro optics on the Shield RMSc and Holosun 507K footprint, so mounting a dot is a direct bolt-on job without adapter plates. Until you add one, the irons carry their weight just fine, with a steel dovetailed tritium front sight ringed in high visibility orange and a double dot rear. Front and rear serrations plus a light slide racking effort make the gun easy to run, and the 3.3 inch cold hammer forged barrel with its recessed target crown gives the Reflex accuracy that outpaces its size. There is even a slim rail up front that accepts subcompact lights like the Streamlight TLR-7 Sub and SureFire XSC.
Reflex MRD Capacity and Carry Comfort
At one inch wide and 18.4 ounces, the Reflex disappears under a shirt, yet the two included magazines put 26+1 rounds at your disposal. The 11 rounder comes with both flush-fit and pinky extension base pads for the deepest concealment, while the 15 rounder extends the frame for a full grip when you want it. The Flat Dark Earth PVD finish wears well against holster time and daily handling, and the in-mold grip texture keeps the gun planted at speed without chewing up your side. For a carry gun that shoots like something bigger, this one earns its spot in the rotation.
Key Specifications
- Model: Reflex MRD (Manual Safety)
- Manufacturer Part Number: 66-101419
- UPC: 845737017217
- Caliber: 9mm Luger
- Action: Internal Hammer Fired, Single Action Only
- Trigger Pull: 4.5 – 5.5 lbs
- Barrel: 3.3" Cold Hammer Forged, Recessed Target Crown
- Capacity: 11+1 / 15+1
- Overall Length: 6.2"
- Height: 4.27"
- Width: 1"
- Weight: 18.4 oz
- Sights: Tritium Front with Orange Ring, Double Dot Rear
- Optic Cut: Shield RMSc / Holosun 507K Footprint
- Safety: Ambidextrous Manual Safety + Internal Passive Safeties
- Finish: Flat Dark Earth PVD
What’s Included
- FN Reflex MRD 9mm pistol
- One 11-round magazine
- One 15-round magazine
- Flush-fit and pinky extension base pads for the 11-round magazine
- Owner's manual
Frequently Asked Questions
What red dots fit the FN Reflex MRD?
The slide is cut for the Shield RMSc footprint, which also covers the Holosun 507K, EPS Carry, and other optics sharing that pattern. It mounts directly to the slide with no adapter plates needed. The included iron sights are useable through most compact optics as a backup.
How is the Reflex trigger different from other micro compact 9mms?
Instead of the striker-fired setup most guns in this class use, the Reflex runs an internal hammer with a single action only trigger. That gives it a lighter, crisper break in the 4.5 to 5.5 pound range with a short reset. It is one of the main reasons the Reflex gets brought up in conversations about the best trigger in the micro compact category.
Is the manual safety on the FN Reflex MRD ambidextrous?
Yes, this model has a frame-mounted safety lever on both sides, so lefties are covered. It works alongside the internal passive safeties the Reflex already has built in. The magazine release is also reversible for left-handed use.
Can I mount a light on the FN Reflex?
Yes, the frame has a slim accessory rail sized for subcompact weapon lights. It accepts the Streamlight TLR-7 Sub and SureFire XSC, which are the two most popular options in this size class. Full-size rail lights will not fit, so stick with the subcompact versions.





Reviews
There are no reviews yet.