$38.70
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you own a Ruger Mark series pistol, you've probably heard the stories: light strikes, failure to eject, stovepipes. Some guns run flawlessly out of the box, but others can be temperamental depending on ammo quality and velocity. That's where the Volquartsen Bolt Tune-Up Kit steps in. This kit pairs two of their most popular upgrades into one solution that addresses the two most common reliability complaints about these pistols.
Volquartsen's firing pin is EDM machined from A2 tool steel and hardened to RC56-58 instead of being stamped like the factory version. The strike face is precision ground, and the pin itself is .004 inches wider than stock, which eliminates the side-to-side play that can cause weak hits. That wider striking surface delivers more consistent, harder hits to the primer even with low-velocity or marginal ammo. The result is fewer misfires, especially noticeable if you run suppressed or with cheaper ammunition.
The extractor might be small, but it works harder than almost any other part in the gun. Volquartsen engineered theirs with the hook positioned 0.005 inches closer to the cartridge rim than the factory part, giving it better purchase on the casing. The EDM process allows tolerances as tight as plus or minus 0.0001 inches, and the hook point is hardened to RC58-60. People report this extractor grabs empties with real authority and doesn't lose its edge under impact. If you've been dealing with fail-to-extract jams or having to manually pull stuck cases, this part will change your experience.
Both parts are direct replacements that can be swapped at home with minimal tools. You'll want to work carefully when removing the old extractor since it can fly out under spring tension, but guides are widely available online. Owners report running rounds afterward with zero failures where they previously had recurring issues, and many mention the improvement is especially dramatic when running unsupported or subsonic ammunition.
The kit addresses two major reliability issues in Mark pistols: light strikes and failure to eject. The wider, hardened firing pin delivers more consistent hits to the primer, while the Exact Edge Extractor grabs spent casings more reliably. Together they fix most reliability complaints, especially with lower-quality ammunition or suppressed shooting.
Yes, both are direct replacements and can be swapped at home with basic tools. The firing pin is straightforward to replace. The extractor requires removing it under spring tension, so many people recommend wearing eye protection and working carefully. Plenty of YouTube guides exist for the installation process.
It fits Ruger Mark I, Mark II, Mark III, Mark IV, and all 22/45 variants. If you're unsure which generation you have, check your owner's manual or the slide markings. The kit is not compatible with other .22 pistols outside the Mark series.
Results vary based on the condition of your gun and the ammo you use. Owners report zero failures where they previously had recurring issues, especially with weak ammo or suppressed fire. If your gun already runs flawlessly with quality ammunition, the improvement might be less noticeable. A fussy pistol or one that runs suppressed will see the biggest difference.
| UPC | 810162012687 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | VC3FE |
| Caliber/Gauge | .22 Caliber |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.