Description
Weight is the whole point of this stock. Christensen Arms built the FFT line around a compression molded carbon fiber monocoque shell that strips out the internal bulk found in older composite stock designs, and the result is a long action stock that can run up to a pound lighter than a traditional carbon fiber stock while still holding its shape under recoil. If you're trimming ounces off a mountain rifle or just want a stiffer platform under a varmint contour barrel without adding weight up front, this is the direction Christensen went with their own factory rifles.
Fit and Setup for the FFT Stock on a Remington 700 Long Action
This stock is cut specifically for the Remington 700 long action footprint and is sized for varmint or sporter contour barrel channels, so it drops onto a factory Remington 700 long action or a compatible aftermarket action without needing a custom inlet. Stainless steel bedding pillars are already set in place along with front and rear sling swivel studs, and spot bedding has been applied around the recoil lug area at the factory. Keep in mind that a little hand fitting around the action inlet or magazine well is pretty normal with these stocks since each one is slightly different coming out of the mold, so don't be surprised if you need to do some light sanding to get everything sitting flush.
Green and Tan Finish on This FFT Varmint Contour Stock
The green and tan colorway is hand finished, which means the pattern and shading will vary slightly from one stock to the next. That's just part of how Christensen Arms does their paint work on these, and it gives every stock its own character instead of a machine-perfect uniform look. If you ever want to touch it up or go a different direction down the road, it'll accept air-dry Cerakote without issue.
This stock also comes with a recoil pad already mounted, so between the pillars, sling studs, and pad you're getting a stock that's ready to bolt an action into rather than a bare shell you have to finish outfitting yourself. It's a solid option whether you're building up a lightweight varmint rig from scratch or swapping out a heavier factory stock to shave weight off an existing Remington 700 long action rifle.
Key Specifications
- Manufacturer: Christensen Arms
- Manufacturer Part Number: 810-00058-03
- UPC: 696528095576
- Fits: Remington 700 Long Action footprint
- Barrel Channel: Varmint or Sporter contour profile
- Material: Carbon fiber, Flash Forged Technology (FFT) monocoque shell
- Color: Green with Tan accents
- Style: Sporter-style chassis
- Action Type: Bolt Action
- Bedding Pillars: Stainless steel, pre-installed
- Sling Studs: Front and rear, included
- Recoil Pad: Included
- Length of Pull: Approximately 13.5 inches
What’s Included
- FFT long action stock in Green/Tan finish
- Stainless steel bedding pillars (pre-installed)
- Front and rear sling swivel studs
- Recoil pad
Frequently Asked Questions
Will this FFT stock fit my Remington 700 long action rifle?
Yes, this version is built specifically for the Remington 700 long action footprint with a barrel channel sized for varmint or sporter contour barrels. It's designed to work with factory Remington 700 long actions as well as compatible aftermarket actions built on that same footprint.
Does the FFT stock come with bedding pillars already installed?
Yes, stainless steel bedding pillars come pre-installed, along with spot bedding around the recoil lug area from the factory. Some light fitting or sanding around the inlet may still be needed depending on your specific action and bottom metal.
Can I use my factory Remington bottom metal with this stock?
Many builders have success running factory Remington bottom metal in this stock, though some have found Christensen Arms bottom metal assemblies fit a touch more precisely since the inlet is cut to their spec. It's worth test fitting before you commit to final bedding work.
How much lighter is the FFT stock compared to a standard carbon fiber stock?
The Flash Forged Technology construction shaves off up to a full pound compared to traditionally manufactured carbon fiber composite stocks. That weight savings comes from the monocoque shell design, which removes excess internal material without giving up rigidity.



Reviews
There are no reviews yet.