0
0

Faxon 7.62×39 Type 1 Bolt (.125) – 9310 Steel Salt Bath Nitride

UPC: 816341024267

$70.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 7.62×39 cartridge is famously hard on AR-15 bolts. The steep case taper and thick rims chew up standard mil-spec bolts fast, which is exactly the problem Faxon set out to solve here. This is the standalone Type 1 bolt (.125 bolt face) machined from 9310 tool steel, given a full mil-spec heat treatment, shot peened, and finished in salt bath nitride. That nitride treatment bumps up surface hardness, cuts friction, and shrugs off corrosion better than the old chrome and phosphate coatings you'll find on cheaper bolts.

Why the Faxon 9310 7.62×39 Bolt Holds Up

9310 is the same premium steel used in a lot of high-end bolts, and it's a real step up in toughness over run-of-the-mill 8620. Every bolt gets Magnetic Particle Inspected before it ships, so you know the material is sound with no hidden cracks or stress points. The back of the lugs are chamfered 45 degrees, which helps the bolt cycle smoothly and reliably even when you're feeding hot handloads or running a fast, lightweight action. That chamfer detail matters a lot on this cartridge, where feeding and extraction reliability is the whole ballgame.

Extractor and Fitment on This Faxon Type 1 Bolt

The extractor is cut from S7 tool steel, which is built to take the repeated shock of yanking cases out of the chamber round after round. It comes sprung and ready with the spring, silicone insert, and Crane O-ring already installed, so you're not chasing down small parts to get it running. "Type 1" refers to the .125 bolt face depth used in standard AR-15 7.62×39 barrels, so it drops right into a mil-spec 7.62×39 carrier. Worth noting: this is a Type 1 bolt and won't work with 6.5 Grendel or ARC barrels, which need the deeper Type 2 (.136) face.

If you're building a 7.62×39 upper from scratch or your current bolt is showing its age, this is a smart, no-drama upgrade that pairs nicely with a quality carrier. Faxon backs it with their lifetime guarantee against manufacturing and material defects.

Key Specifications

  • Manufacturer: Faxon Firearms
  • Manufacturer Part Number: FF76239GBCNITRIDE
  • UPC: 816341024267
  • Caliber: 7.62x39mm
  • Platform: AR-15
  • Bolt Type: Type 1 (.125 bolt face)
  • Bolt Material: 9310 Tool Steel
  • Finish: Salt Bath Nitride (Black)
  • Extractor Material: S7 Tool Steel
  • Inspection: Magnetic Particle Inspected (MPI)
  • Heat Treatment: Full Mil-Spec, Shot Peened
  • Lug Detail: 45-degree chamfered lugs
  • Grendel/ARC Compatible: No (use Type 2 .136 bolt)

What’s Included

  • Faxon 7.62×39 Type 1 bolt (9310, nitride)
  • S7 tool steel extractor (installed)
  • Extractor spring, silicone insert, and Crane O-ring (installed)

Frequently Asked Questions

Will the Faxon 7.62×39 Type 1 bolt fit my AR-15 carrier?

Yes. This is a standard Type 1 bolt with a .125 bolt face, so it drops right into a mil-spec AR-15 7.62×39 bolt carrier. It's a direct swap for a worn or failing bolt in an existing 7.62×39 build. As always, it's smart to confirm the bolt face matches your barrel manufacturer before install.

Does this work with 6.5 Grendel or 6mm ARC barrels?

No. This is a Type 1 (.125) bolt made for standard AR-15 7.62×39 barrels. Grendel and ARC cartridges use a deeper .136 bolt face, so you'd need a Type 2 bolt for those. Running the wrong bolt face causes reliability and safety problems, so match it carefully.

Why is 9310 steel better than a regular mil-spec bolt for 7.62×39?

The 7.62×39 round is rough on AR bolts thanks to its case taper and hard, often steel-cased ammo. 9310 tool steel is tougher and more fatigue resistant than the 8620 used in a lot of standard bolts, which helps this one last longer under that stress. Add in the salt bath nitride finish and MPI testing and you get a bolt built specifically to hold up on this platform.

Is the extractor already assembled on this Faxon bolt?

Yes. The S7 tool steel extractor comes installed and sprung with the spring, silicone insert, and Crane O-ring in place. You don't have to source or fit any of those small parts yourself, so it's ready to drop into your carrier right out of the package.

Additional information

UPC

816341024267

Manufacturer

Manufacturer Part Number

FF76239GBCNITRIDE

Reviews

There are no reviews yet.

Be the first to review “Faxon 7.62×39 Type 1 Bolt (.125) – 9310 Steel Salt Bath Nitride”