$299.00
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Faxon's Match Series spiral fluted barrel is the kind of upgrade that quietly changes how a .308 AR10 shoots. Starting with 416-R stainless steel and 5R button rifling, it's cut for the platform and geared toward folks chasing tight groups without babying the rifle. The 5R geometry runs lands opposite grooves with softer angles, which helps cut down on jacket deformation and makes cleaning less of a chore. It ships with a 1:10 twist that plays nicely with heavier match projectiles, and the field notes from precision guys back that up, with 175-grain loads tending to be the sweet spot.
The whole thing gets salt bath nitrided (QPQ) inside and out, which locks in the bore, fights corrosion, and helps keep fouling from building up. The spiral fluting isn't just for looks. It shaves weight off the profile and adds surface area to help the barrel shed heat during longer strings, all while holding onto the rigidity you want out of a precision barrel. Every barrel is magnetic particle inspected and capped with a recessed 11-degree target crown to protect the rifling where it matters most.
Running a rifle-length gas system, this barrel gives you a smoother recoil impulse and good dwell time, which translates to easier tuning and more consistent cycling. The 20-inch length hits a nice balance of velocity and handling, so you're not lugging around a 24-inch bull barrel but still getting real reach on target. The extension is DPMS/LR-308 compatible and coated in Nickel Teflon for dry lubricity and a snug fit at the receiver interface. Muzzle threads are 5/8×24, the gas block journal is .750" with a 1.1" journal length, so most standard AR10 components drop right on.
Made in-house in Greater Cincinnati, Ohio, and backed by the Faxon Lifetime Guarantee. Whether you're chasing a buzzer or a bullseye, this one earns its keep.
Yes, this barrel uses a DPMS/LR-308 compatible extension, so it drops into standard DPMS-pattern AR10 upper receivers. The extension is Nickel Teflon coated for a snug fit at the receiver interface. As always, confirm compatibility with your specific bolt, receiver set, and other components before assembly.
The 1:10 twist is well suited to heavier match-grade .308 projectiles, and field results tend to favor 175-grain loads for the best consistency. It'll stabilize a range of common .308 Win bullet weights, so you have room to experiment with different factory ammo and handloads to find your rifle's preference.
No. The Match Series uses 416-R stainless, 5R button rifling, and QPQ nitride inside and out, but it is not honed and lapped. That extra step is reserved for Faxon's MATCH-X Series barrels, which carry an uncoated stainless exterior instead of nitride.
The salt bath nitride (QPQ) treatment is applied inside and out, which improves corrosion resistance and surface wear. It also helps reduce fouling, so cleaning goes quicker, and it supports a long service life for the barrel.
| UPC | 816341028593 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 10B810R20SHQ5RNP3 |
| Caliber/Gauge | .308 / 7.62 NATO |
| Length | 20" |
| Sights | No |
You must be logged in to post a review.
Reviews
There are no reviews yet.