Description
The Faxon MuzzLok Plan B Brake is one of those upgrades that solves two problems at once. On its own it's a well-built stainless muzzle brake that cuts down on felt recoil and keeps the front end from climbing between shots. Machined from 17-4 PH stainless with an H1025 heat treat, it's made to shrug off muzzle blast, heat, and the corrosion that comes with a lot of rounds downrange. The 1/2×28 thread fits most 5.56 and .223 barrels, and the .250 bore keeps it dialed in for those smaller calibers.
What Sets the MuzzLok Timing System Apart
If you've ever fought with crush washers or a stack of shims trying to clock a brake straight, the MuzzLok setup is going to feel like a breath of fresh air. Instead of relying on a crush washer, it uses a left-hand timing nut. You thread the brake to the orientation you want, snug the nut down against the shoulder, and it holds. The real payoff is repeatability. Pull the brake off to clean it or swap barrels, put it back on, and it returns to the same spot without shifting your point of impact around.
Suppressor-Ready Through the Plan B Interface
This is where the Plan B name earns its keep. The brake carries a 29/32-24 UNEF-2A interface thread that mates to a 1.375-24 HUB via a Plan B to HUB adapter. That opens the door to hub-mount cans like the Faxon HARMONIX and CORESYNC when you've got the right adapter in place. So you can run it as a dedicated brake now and roll into a suppressed setup later without swapping your whole muzzle device.
Faxon builds these in the USA, and the fit and finish reflect that. For a competition gun, a range rifle, or a build you plan to suppress down the line, it's a versatile piece that earns its spot up front.
Key Specifications
- Manufacturer: Faxon Firearms
- Manufacturer Part Number: FFMDPBBRAKE01
- UPC: 816341029606
- Muzzle Thread: 1/2×28
- Bore Diameter: .250" (for .223 and smaller)
- Plan B Interface Thread: 29/32-24 UNEF-2A
- HUB Compatibility: 1.375-24 HUB via Plan B to HUB adapter
- Material: 17-4 PH Stainless Steel (H1025 heat treat)
- Mounting System: MuzzLok left-hand timing nut, no crush washers or shims
- Suppressor Compatibility: Faxon HARMONIX and CORESYNC (with adapter)
- Recommended Calibers: 5.56 NATO / .223 Rem and smaller
- Country of Origin: USA
What’s Included
- MuzzLok Plan B muzzle brake
- Left-hand timing nut
- Installation instructions
Frequently Asked Questions
Does the MuzzLok Plan B brake need crush washers or shims to time it?
No. The MuzzLok system uses a left-hand timing nut instead. You thread the brake to your preferred orientation and lock the nut against the shoulder, which holds the timing without any crush washers or shims. It also returns to the same spot if you remove and reinstall it.
Can I run a suppressor on the Faxon MuzzLok Plan B brake?
Yes, with the right adapter. The brake's 29/32-24 Plan B interface thread mates to a 1.375-24 HUB using a Plan B to HUB adapter. Once that's in place, it works with hub-mount cans like the Faxon HARMONIX and CORESYNC. Just confirm your adapter and hub compatibility before mounting anything.
What barrels does this brake fit?
It's cut for 1/2×28 threads, which is the common pattern on most 5.56 and .223 barrels. The .250 bore is sized for .223 and smaller calibers, so it's a natural fit for AR-15 builds chambered in 5.56 NATO or .223 Rem.
Will this brake shift my point of impact when I take it off and put it back on?
Any muzzle device can move POI, but the MuzzLok Plan B system is designed to minimize that. Because the left-hand timing nut locks the brake to a set orientation, reinstalling it returns the device to the same position for repeatable timing. That consistency helps keep your zero from wandering after cleaning or a barrel swap.



Reviews
There are no reviews yet.