Description
Anyone who has tried to sight in a thermal scope with a regular paper target knows the frustration. Standard targets read as a flat, invisible blob through a thermal optic because those sensors see heat differences, not printed ink. The EZ-Aim Thermal ID Boar Target solves that with a patented treatment that gives the boar silhouette distinct heat signatures across its body, so the shape shows up clearly on your display and gives you a real aiming reference.
The part that makes this one stand out is that it works without any batteries, heat packs, or power source. The special coating reveals the silhouette details even in broad daylight, which is where most folks prefer to zero anyway for better visibility and safety. It measures 24 inches by 12 inches, a practical size for range work and life-size enough to mimic a real hog when you are dialing in for night hunts. It is also made in America.
Setting Up the Thermal ID Boar Target at the Range
The back is adhesive, so you peel and stick it straight onto a cardboard backer or target board without messing with staples or tape. Allen recommends an operating window of roughly -20°F to 110°F for the treatment to show its best contrast, which covers just about any day you would want to be out shooting. Pair it with your optic's one-shot or freeze-frame zero function and you can be dialed in with just a handful of rounds.
Who Gets the Most Out of This Target
Hog hunters running thermal or night vision rigs are the obvious crowd here, but it works for anyone confirming zero on an infrared scope. The boar shape doubles as good practice for target ID and shot placement, so you are not just checking your zero, you are getting reps that carry over to the field. If you have been fighting foil scraps and hand warmers to get a usable heat signature, this takes the guesswork out of it.
Key Specifications
- Silhouette: Boar
- Size: 24 in x 12 in
- Material: Paper with patented Thermal ID treatment
- Backing: Adhesive (peel and stick)
- Intended Use: Sighting in thermal imaging and night vision optics
- Heat Source Required: None (works in daylight, no external heat needed)
- Recommended Temperature Range: -20°F to 110°F
- Color: Gray
- Count: 1 target
- Origin: Made in USA
- Brand: EZ-Aim (Allen Company)
- Manufacturer Part Number: 15801
- UPC: 026509076926
What’s Included
- 1 EZ-Aim Thermal ID Boar Paper Target (24 in x 12 in)
Frequently Asked Questions
Does the Thermal ID Boar Target need batteries or a heat source to work?
No. The patented Thermal ID treatment creates the heat-signature contrast on its own, so you do not need hand warmers, heat packs, or any power source. It relies on differences in how the treated areas read to your thermal optic, which is why it shows up even in broad daylight.
Can I use this target in daylight, or only at night?
Daylight works great, and it is actually the preferred way to zero for most folks. The treatment reveals the boar silhouette clearly in bright conditions, giving you better visibility and safer setup than fumbling around after dark. Just avoid pointing your thermal optic toward the sun, since direct sun can damage the sensor.
How do I mount the Thermal ID Boar Target?
It has an adhesive back, so you peel it and stick it directly onto a cardboard backer or target board. No staples or tape required. For the sharpest thermal contrast, keep it within the recommended operating range of about -20°F to 110°F.
Will this work with night vision as well as thermal scopes?
Yes. EZ-Aim designed these targets for both thermal imaging and night vision optics. The boar silhouette gives you a clear aiming reference for confirming zero and practicing shot placement on either type of setup.





Reviews
There are no reviews yet.