0
0

EGW EAA Super Sight Mount for Leupold DeltaPoint Pro – Black

UPC: 841370114238

$44.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been wanting to run a red dot on your EAA Witness or Tanfoglio without sending the slide out for milling, this EGW mount is one of the simplest ways to get there. It replaces your factory rear sight and sits in the existing dovetail, so you can add an optic now and go back to irons later if you change your mind. Machined from 7075 aluminum with a matte black hardcoat finish, it's built to hold zero and take the beating that comes with real-world shooting.

What the EAA Super Sight Mount Fits

This one is cut specifically for EAA and Tanfoglio pistols equipped with adjustable LPA/Bomar style rear sights. That covers a solid lineup including the Hunter, Elite Stock II and III, Limited Custom, Limited Custom Xtreme, Match Elite, Match Xtreme, P Match, P Match Pro, and Stock II and III Xtreme models. Worth noting: it will not work with Witness pistols running a fixed rear sight or a Novak style adjustable rear sight, so check what's on your slide before ordering.

Optics That Work With This DeltaPoint Pro Mount

The plate uses the Leupold DeltaPoint Pro footprint, which opens the door to a good range of optics. Along with the DeltaPoint Pro itself, it accepts the JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, and Optima. Holosun 407K and 507K owners can make it work too, though the rear locator pins have to be filed or milled off for those to seat properly.

Installing the EGW Super Sight Mount

Setup is about as straightforward as it gets. EGW builds these to install left to right with the muzzle facing forward, and the dovetail has a progressive taper that makes drifting it in a lot easier than a tight straight cut. All the mounting hardware comes in the box, and EGW recommends blue Loctite on the screws torqued to 15 in-lbs. A handy trick is to slip a small piece of paper between the optic and the mount during install so you keep Loctite off the sight and make future removal cleaner.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49407
  • UPC: 841370114238
  • Color: Black
  • Finish: Matte Black Hardcoat Anodized
  • Material: 7075 Aluminum
  • Mount Type: Dovetail (rear sight replacement)
  • Number of Pieces: 1-Piece
  • Overall Length: 1.604 in
  • Overall Width: 0.99 in
  • Overall Height: 0.335 in
  • Optic Footprint: Leupold DeltaPoint Pro
  • Pistol Fit: EAA / Tanfoglio with adjustable LPA/Bomar rear sight
  • Torque Spec: 15 in-lbs

What’s Included

  • EGW EAA Super Sight dovetail mount
  • (2) 6-32 button head screws
  • (1) 6-32 x 3/16 set screw

Frequently Asked Questions

Which pistols does the EAA Super Sight mount fit?

It's made for EAA and Tanfoglio pistols that use an adjustable LPA/Bomar style rear sight. That includes models like the Hunter, Elite Stock II and III, Limited Custom, Match Elite, Match Xtreme, P Match, P Match Pro, and the Stock II and III Xtreme. It does not fit Witness pistols with a fixed rear sight or a Novak style adjustable rear sight.

Do I need to mill my slide to use this mount?

No. This mount replaces your existing rear sight and installs in the factory dovetail, so there's no permanent machining required. You can remove it and put your original rear sight back on whenever you want.

What optics work with this DeltaPoint Pro mount?

The plate uses the Leupold DeltaPoint Pro footprint, so it fits the DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, and Optima. The Holosun 407K and 507K will also work, but only after the rear locator pins are filed or milled off so the optic can seat flat.

Does the mount come with everything I need to install it?

Yes, the mounting hardware is included in the box, which is two 6-32 button head screws and one 6-32 set screw. EGW recommends using blue Loctite and torquing the screws to 15 in-lbs. A piece of paper placed between the optic and mount during install helps keep Loctite off your sight and makes removal easier down the road.

Additional information

UPC

841370114238

Manufacturer

Manufacturer Part Number

49407

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW EAA Super Sight Mount for Leupold DeltaPoint Pro – Black”