$5,824.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Desert Tech SRS-M2 solves a problem that has bugged long-range enthusiasts forever: how do you get full 26 inch barrel performance out of a rifle you can carry through timber or maneuver in a blind? The answer is the bullpup layout. By moving the action back into the stock, the SRS-M2 keeps overall length to about 37 inches, roughly the size of a compact carbine, while giving your 6.5 Creedmoor loads every bit of velocity they were designed for. At 9.5 pounds it hauls easier than most dedicated precision rigs too.
Desert Tech backs this rifle with a 1/2 MOA guarantee for three-shot groups at 100 yards using qualified match ammunition, and the engineering supports the claim. The telescoping bolt uses six locking lugs in two rows for consistent lockup and a shorter bolt stroke, and the flat-faced trigger adjusts from 1.5 to 7 pounds with a crisp break and short reset. The full-length Picatinny rail comes canted at 30 MOA, giving your scope extra elevation for stretching way out past 1,000 yards, and the 1:8 twist barrel stabilizes heavy match bullets without breaking a sweat.
Here is where the SRS-M2 earns its keep. The barrel clamping system lets you swap barrels or entire calibers in under a minute with a single 5mm hex torque wrench, no gunsmith required. Options run from .308 Winchester up through .300 Win Mag and .338 Lapua Magnum, and the return-to-zero design means your barrel comes back on target after every swap, even between short and long action calibers. Buy conversion kits instead of whole rifles and your scope stays put.
The aluminum chassis wears a machined M-LOK handguard for lights, bipods, and barricade stops, plus an adjustable cheek riser with a half inch of height and an integrated monopod in the stock for fine elevation control from prone. The 26 inch barrel is threaded 5/8×24, so adding a brake or suppressor is simple. Whether you are ringing steel at distance or packing into elk country, this is a rifle built to earn its spot.
Yes, and it is one of the biggest reasons people buy this rifle. Conversion kits let you change the barrel, bolt, and magazine in under a minute using the included torque wrench, with no special tools or gunsmith visit. Available calibers include .308 Winchester, .300 Win Mag, .338 Lapua Magnum, and several other long-range options.
It does. Desert Tech guarantees return to zero with its barrel clamping system, which uses four smaller clamps for consistent, repeatable mounting pressure. You can pull the barrel for cleaning, travel, or a caliber swap and reinstall it without needing to re-zero your optic.
Desert Tech guarantees 1/2 MOA three-shot groups at 100 yards with qualified match ammunition. The 26 inch barrel with a 1:8 twist handles heavy match bullets well, and the six-lug telescoping bolt design delivers very consistent lockup shot to shot. Paired with the 30 MOA rail, this rifle is set up to perform well past 1,000 yards.
The bullpup layout puts the action behind the trigger, so the SRS-M2 keeps a full 26 inch barrel while measuring only about 37 inches overall. That means you get full velocity and downrange energy from your 6.5 Creedmoor in a package that is far easier to pack, maneuver, and shoot from tight positions than a conventional long-range rifle.
| UPC | 813865028719 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SRSRFMD26RBB |
| Action | |
| Barrel Length | 26" |
| Caliber/Gauge | 6.5mm Creedmoor |
| Capacity | 10 + 1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.