0
0

Forster #7/64 Drill Bushing for Universal Sight Mounting Fixture

UPC: 757253006944

$11.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster #7/64 Drill Bushing is one of those small parts that does a big job. It slides into the over-arm of your Universal Sight Mounting Fixture and guides your drill bit through hardened, precision-ground steel so the bit can't wander, cock, or walk off center. If you've ever tried to freehand a mounting hole and watched the bit skate across a hardened receiver, you already know why this matters.

Where the #7/64 Bushing Fits In

This is a pre-drill bushing sized to work alongside the 6-48 setup that Forster's fixtures use for scope bases, receiver sights, and shotgun beads. The idea behind starting with a 7/64 pilot is straightforward: it breaks the surface and gives your tap drill a hole to follow, so the finish bit acts more like a reamer and cuts a truer, cleaner hole. It's an old machinist's trick that pays off on tough receivers where a bit can skate or cut oversize.

Why Guided Holes Beat Freehand

The whole point of the Forster fixture system is keeping everything in true alignment with the exact center of the barrel. The bushing is what makes that promise real. Runout gets eliminated because the drill is guided through hardened, ground steel, and when it's tap time you swap in a bushing of the correct size so the tap can't cock over and snap. That's the number one cause of broken taps and sloppy holes, and this setup takes it off the table.

Built to Last

Forster has been making these fixtures and bushings for decades, and gunsmiths keep coming back to them because they hold up. The #7/64 bushing is hardened steel, machined to drop cleanly into the fixture's over-arm holes with standard .500 and .860 inch center spacing. Whether you're replacing a worn bushing that's developed some slop or adding this size to your kit, it's a cheap insurance policy against a ruined receiver.

Key Specifications

  • Manufacturer: Forster Products
  • Bushing Size: #7/64
  • Type: Drill Guide Bushing (pre-drill)
  • Fits: Forster Universal Sight Mounting Fixture
  • Material: Hardened, precision-ground steel
  • Intended Use: Drilling and tapping for scope mounts, receiver sights, and shotgun beads
  • Thread System: 6-48 setup
  • Category: Gunsmithing Tools & Gunsmith Supplies
  • UPC: 757253006944

What’s Included

  • One Forster #7/64 drill bushing

Frequently Asked Questions

What does the Forster #7/64 drill bushing do?

It's a hardened steel guide bushing that drops into the over-arm of the Forster Universal Sight Mounting Fixture. As you drill, the bit passes through the bushing so it stays centered and can't wander or cock over. That gives you clean, accurately placed holes for mounting scope bases, receiver sights, and shotgun beads.

Why is a 7/64 used as a pre-drill for 6-48 holes?

Starting with a smaller pilot hole lets the tap drill follow an existing hole and cut more like a reamer, which produces a truer, better-sized hole. It's especially helpful on hardened receivers where a bit can skate across the surface or cut oversize. It's an established machinist's approach to getting accurate, repeatable holes.

Will this bushing fit my Forster Universal Sight Mounting Fixture?

Yes, the #7/64 bushing is made specifically for the Forster Universal Sight Mounting Fixture and slides into the over-arm's guide holes. The fixture uses standard center spacing of .500 and .860 inches, so the bushing seats and aligns exactly where it should. If you already run the Forster fixture, this is a direct fit.

Should I use a standard drill bit with this bushing?

Use a bit that matches the bushing and is in good shape, since a sharp bit is what keeps the hole true and prevents oversizing. Keep the bottom of the bushing sitting as close to the part you're drilling as you can for the best guidance. If a bushing has developed slop from heavy use, replacing it restores that tight fit.

Additional information

UPC

757253006944

Manufacturer

Reviews

There are no reviews yet.

Be the first to review “Forster #7/64 Drill Bushing for Universal Sight Mounting Fixture”