$13.99
538 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anyone who spends real time at a cleaning bench knows the frustration of trying to reach the spots a patch and jag skip right over. Bolt lug recesses, chamber corners, slide rails, feed ramps, and the guts of an action all hold onto carbon and gunk that a bore rod never touches. That is exactly the gap these Sinclair International swabs fill. Each one carries a pharmaceutical-grade cotton head on both ends of a six-inch wooden handle, so you get twice the working surface per swab and enough reach to get deep without cramming your fingers into an oily receiver.
The cotton is bleached white, which is more useful than it sounds. When you are digging carbon out of a lug recess or wiping down a bolt face, a bright white head lets you see exactly how much fouling you are pulling out and when the area is finally clean. Dab a little solvent on one end for scrubbing, then flip to the dry end to wipe things down. The wooden handle has enough backbone to apply real pressure without folding over the way flimsy drugstore swabs do.
These are the little workhorses of firearm maintenance. Use them to spread solvent or lube into hard-to-reach places, clean out trigger group crevices, get around ejectors and extractors, and detail slide rails on a pistol. A common tip from folks who clean a lot of bolt guns is to let solvent sit and do its work for a few minutes before you go after the hardened fouling, then a swab pulls the loosened crud right out. Just keep in mind that cotton can leave the occasional stray fiber behind in a chamber, so a quick visual check before you reassemble is smart practice.
With 100 double-ended swabs in the pack, you have 200 usable cotton heads to burn through, which is plenty for a season of range trips and cleaning sessions. Toss a handful in your range bag and keep the rest on the bench. They are the kind of consumable you never think about until you are out of them, so stocking up makes sense.
They shine anywhere a patch and jag can't reach, like bolt lug recesses, chamber corners, feed ramps, ejectors, and slide rails. Dab solvent on one end to scrub loosened fouling, then flip to the dry end to wipe things down. They're also handy for applying a controlled bit of oil or lube to small parts without slathering it everywhere.
The biggest difference is the handle. These use a stiff six-inch wooden shaft that lets you apply real pressure and reach deep into an action without the handle folding over on you. The pharmaceutical-grade cotton heads are also denser and more consistent, and having a swab on both ends means you get more use out of every piece.
Cotton can occasionally shed a stray fiber, especially when you're really working it against sharp edges. It's good practice to do a quick visual check of the chamber and lug recesses before reassembly. For most general cleaning and detail work outside the bore, that's rarely an issue.
Since each swab has a cotton head on both ends, a 100 pack gives you 200 usable tips. For most people that's a full season or more of range trips and cleaning sessions. They're an easy consumable to stock up on since you'll always find a use for them.
| UPC | 032599001588 |
|---|---|
| Manufacturer | |
| Quantity | 100 |
You must be logged in to post a review.
Reviews
There are no reviews yet.