Description
The Diamondback DB Barrel gives you a solid foundation for a compact .308 build without spending a fortune on a name-brand blank. At 13.50 inches with a mid-length gas system, it hits that sweet spot between a maneuverable package and enough dwell time to keep an AR-10 running smoothly. It's cut from 4150 chrome moly vanadium steel, which is the same tough barrel steel Diamondback runs in their factory DB10 pistols, so you know it holds up to a hearty round count.
What the 4150 CMV Steel and Nitride Finish Bring to the Table
Barrel steel matters more than most folks think, and 4150 CMV is a proven workhorse that handles the heat and pressure of full-power .308 loads. The black nitride treatment goes a step further by hardening the surface and fighting off rust and wear, inside and out. That means easier cleaning and a longer service life, which is exactly what you want on a caliber that runs as hot as .308 Winchester.
Gas System, Twist Rate, and Threading on the DB Barrel
This one runs a mid-length gas system paired with a 1:10 twist, a combo that stabilizes the heavier 168 to 175 grain match projectiles most .308 shooters lean on. The muzzle comes threaded 5/8×24, the standard for .308, so bolting on a brake, flash hider, or suppressor mount is plug and play. Independent testing on Diamondback's 13.5-inch barrel showed muzzle velocities running roughly 2,200 to 2,500 fps depending on the load, which is respectable performance out of a shorter tube.
Building Around the Diamondback 308 Barrel
This is a DPMS-pattern .308 barrel with a medium profile, so it drops into standard AR-10 style uppers and works with common .308 handguards, gas blocks, and bolt carrier groups. Whether you're rebarreling a tired build or starting fresh, it's a dependable core to work from. Just remember you'll need to supply your own gas block, gas tube, and any muzzle device since those aren't part of the package.
Key Specifications
- Manufacturer: Diamondback Firearms
- Model: DB Barrel
- MPN: DB308M13.5M50B10
- UPC: 815875019220
- Caliber: .308 Winchester
- Barrel Length: 13.50"
- Twist Rate: 1:10
- Gas System: Mid-Length
- Material: 4150 Chrome Moly Vanadium Steel
- Finish: Black Nitride
- Profile: Medium / Mid-Length
- Muzzle Thread: 5/8×24
- Rifling: 5-Groove Button Rifling
- Platform: AR-10 / DPMS-Pattern .308
What’s Included
- Diamondback DB Barrel, .308 Win, 13.50"
Frequently Asked Questions
What twist rate is the Diamondback 13.5" .308 barrel?
This barrel has a 1:10 twist, which is the go-to rate for .308 Winchester. It stabilizes the heavier 168 to 175 grain match and hunting bullets most .308 shooters run, and it handles lighter loads just fine too. That makes it a versatile choice whether you're punching paper or chasing game.
Will this DB Barrel fit my AR-10 upper?
Yes, it's a DPMS-pattern .308 barrel with a medium profile, so it drops into standard AR-10 style uppers. You'll want to confirm your handguard, gas block, and gas tube are also DPMS-spec for a clean fit. Since barrel extensions and gas block journals can vary between .308 patterns, it's worth double-checking your existing parts before assembly.
Is the muzzle threaded on the Diamondback 308 barrel?
It comes threaded 5/8×24, which is the industry standard for .308 caliber muzzles. That means you can bolt on a muzzle brake, flash hider, or suppressor mount without any extra machining. Keep in mind a muzzle device isn't included, so you'll supply your own.
What does the black nitride finish actually do?
Nitride is a surface hardening treatment that boosts corrosion resistance and wear resistance both inside the bore and on the exterior. It makes cleaning easier and extends the barrel's service life, which is a real benefit on a hot-running caliber like .308. It also gives the barrel that even, matte black look.





Reviews
There are no reviews yet.