0
0

Dead Air Xeno Pistol Wee Brake 9mm 1/2-28 QD Muzzle Brake DA125

UPC: 810128160667

$71.99

160 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Pistol caliber carbines deserve the same quick-detach convenience rifle guys have enjoyed for years, and that is exactly what the Xeno Pistol Wee Brake delivers. This little muzzle device threads onto any 1/2-28 barrel with a 9mm bore and gives you a rock-solid mounting point for Dead Air suppressors running the Xeno system. Pair it with the right Xeno Adapter and you can move one can between your Wolfman, Ghost, Primal, Nomad, Sierra 5, and plenty of others without breaking out a wrench every time.

Why the Wee Brake Earns Its Spot on Your Barrel

Installation is about as painless as it gets. The Wee Brake does not require timing, so there is no fiddling with shims or crush washers to get ports clocked just right. Thread it on, torque it down, done. On top of the QD convenience, it adds a bit of recoil mitigation when you are running unsuppressed, which is a nice bonus on a lightweight 9mm sub-gun. The taper mount design indexes the suppressor to the same spot every single time, so your zero stays put when you pull the can off and put it back on.

Built From the Right Stuff

Dead Air machines the Wee Brake from 4140 HT alloy steel with a black nitride treatment, and that choice matters more than it might sound. Nitrided 4140 shrugs off carbon and copper fouling, cleans up easier, and resists the thread galling that can plague uncoated stainless muzzle devices. Nobody wants to drill a seized mount out of the back of an expensive suppressor.

Xeno Wee Brake Sizing and Fit

This is the 1/2-28 version, the most common thread pitch on 9mm barrels, and it measures just 1.575 inches long at around 2.4 ounces. The bore accommodates projectiles up to .36 caliber, so it also works on fixed-barrel 9mm hosts and smaller rifle calibers where the thread pitch matches. If your barrel runs 5/8-24 or M13.5×1 LH instead, Dead Air offers the same brake in those pitches. Keep in mind the Xeno Adapter for your suppressor is sold separately.

Key Specifications

  • Manufacturer: Dead Air Silencers
  • Manufacturer Part Number: DA125
  • UPC: 810128160667
  • Model: Xeno
  • Product Type: Muzzle Brake / QD Suppressor Mount
  • Thread Pattern: 1/2"-28
  • Bore Size: 9mm (up to .36 caliber projectiles)
  • Material: 4140 HT Alloy Steel
  • Finish: Black Nitride
  • Overall Length: 1.575 in
  • Weight: 2.40 oz
  • Color: Black
  • Timing Required: No
  • Compatibility: Dead Air Xeno Adapter equipped suppressors

What’s Included

  • Xeno Pistol Wee Brake, 1/2-28

Frequently Asked Questions

Which suppressors work with the Xeno Pistol Wee Brake?

It mounts any Dead Air suppressor set up with a Xeno Adapter, including the Wolfman, Ghost, Primal, Nomad, and Sierra 5 among others. The adapter installs in the rear of the suppressor and locks onto the brake's taper mount. Just note the Xeno Adapter is a separate purchase and is not included with the brake.

Does the Wee Brake need to be timed during installation?

No, and that is one of its best features. Unlike traditional muzzle brakes, there are no ports that need to be clocked to a specific position, so you skip the shims and crush washers entirely. Thread it onto your 1/2-28 muzzle, torque it down, and you are ready to shoot.

Will my point of impact shift when I take the suppressor on and off?

The Xeno mounting system uses a large taper that indexes the suppressor to the same position every time it is attached. That repeatability is the whole point of the design, so shift between mounting cycles is minimal. It is a big part of why the Xeno system has a strong reputation among suppressor owners.

Can I use the Xeno Wee Brake on something other than a 9mm PCC?

Yes, within limits. The bore accepts projectiles up to .36 caliber, so it works on fixed-barrel 9mm hosts and rifle calibers under that diameter as long as your barrel is threaded 1/2-28. If your barrel has a different thread pitch, Dead Air also makes this brake in 5/8-24 and M13.5×1 LH versions.

Additional information

UPC

810128160667

Manufacturer

Manufacturer Part Number

DA125

Caliber/Gauge

9mm

Color

Black

Length

4.4500

Model

Product Type

Brake

Shipping Weight

0.154

Thread Pattern

1/2"-28

Reviews

There are no reviews yet.

Be the first to review “Dead Air Xeno Pistol Wee Brake 9mm 1/2-28 QD Muzzle Brake DA125”