0
0

Daniel Defense MUTE30Ti Titanium .30 Cal Suppressor, .300 Win Mag Rated

UPC: 818773025409

$832.99

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Daniel Defense was one of the first big names to put a 3D-printed suppressor on the market with the Wave back in 2017, and the MUTE30Ti is where all that experience landed. This is a purpose-built precision rifle can, not a do-everything compromise. The internals use a low-flow architecture that puts every bit of design effort into total sound reduction, taming recoil impulse, and killing muzzle flash with an integral flash hider. If your shooting is deliberate, whether that's a bolt gun on steel at distance or a hunting rifle where the first shot is the one that counts, this is the kind of can that rewards you for it.

Titanium Where It Counts on the MUTE30Ti

The whole suppressor is printed as a single weldless titanium structure, which is why it comes in at just 8.3 ounces despite being magnum rated up to .300 Win Mag. No welds means no weak points, and the printed baffle geometry stays consistent from one unit to the next, so performance is repeatable shot after shot. At 6.86 inches long with a slim 1.55 inch diameter, it hangs off the muzzle without wrecking your rifle's balance, and that trimmed-down profile stays out of your scope's field of view. On a low-magnification setup or a rifle with a low-mounted optic, that matters more than most people realize until they've dealt with a fat can eating the bottom of their sight picture.

Mounting the MUTE30Ti

It runs the industry-standard HUB mounting system and ships with a 5/8×24 direct-thread mount, so most .30 caliber precision rifles are ready to go out of the box. If you already run HUB mounts across your other cans, it drops right into your existing setup. Between the titanium build, the sound-first internal design, and Daniel Defense's lifetime warranty behind it, the MUTE30Ti makes a strong case as the one can to dedicate to your precision rig.

Key Specifications

  • Manufacturer: Daniel Defense
  • Model: MUTE30Ti
  • Manufacturer Part Number: 06-140-17155
  • UPC: 818773025409
  • Caliber Rating: .30 Caliber, rated up to .300 Win Mag
  • Construction: Weldless, fully 3D-printed titanium
  • Weight: 8.3 oz
  • Overall Length: 6.86 in
  • Diameter: 1.55 in
  • Mounting System: HUB compatible
  • Included Mount: 5/8×24 direct-thread
  • Flash Reduction: Integral flash hider
  • Color: Gray
  • Warranty: Daniel Defense Lifetime Warranty

What’s Included

  • Daniel Defense MUTE30Ti suppressor
  • 5/8×24 direct-thread HUB mount

Frequently Asked Questions

What calibers can I run through the MUTE30Ti?

It's a .30 caliber can rated all the way up to .300 Win Mag, which covers the vast majority of precision and hunting cartridges. That includes .308 Win, 6.5 Creedmoor, .300 Blackout, and other common bolt gun chamberings at or below that pressure level. Always confirm your specific cartridge and barrel length fall within Daniel Defense's guidelines before mounting up.

Is the Daniel Defense MUTE30Ti a good choice for a semi-auto rifle?

It will physically mount on anything with compatible threads, but it was designed around bolt guns and deliberate precision shooting. The low-flow internals prioritize maximum sound reduction, which means more back pressure than a flow-through design. On a gas gun you'll get great suppression but also more gas back at the shooter, so if a semi-auto is your primary host, a high-flow can may suit you better.

Does the MUTE30Ti work with my existing suppressor mounts?

Yes, it uses the industry-standard HUB (1.375×24) mounting system, so it accepts a huge range of aftermarket mounts and muzzle devices. Out of the box it comes with a 5/8×24 direct-thread mount, which is the standard thread pitch for most .30 caliber rifle barrels.

How durable is a 3D-printed titanium suppressor?

Very. The MUTE30Ti is printed as one continuous weldless titanium structure, so there are no welded joints to fatigue or fail over time. Daniel Defense has been building 3D-printed suppressors since the Wave launched in 2017, and they back the MUTE30Ti with a lifetime warranty.

Additional information

UPC

818773025409

Manufacturer

Manufacturer Part Number

06-140-17155

Caliber/Gauge

.30 Caliber

Color

Gray

Model

Product Type

Suppressor

Shipping Weight

1.0

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense MUTE30Ti Titanium .30 Cal Suppressor, .300 Win Mag Rated”

Related Products