0
0

Daniel Defense DDM4 M4A1 5.56 NATO 14.5″ Rifle with RIS II Rail

UPC: 818773023276

$2,418.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There is a reason the M4A1 with the RIS II rail shows up in so many deployment photos from the last two decades. Daniel Defense built that quad rail for SOCOM's SOPMOD Block II program back in 2005, and this rifle puts the same handguard on a factory DD gun you can take home. If you have been eyeing a Block II style build, this saves you the parts hunt and gives you the real thing from the company that made it.

What Makes the DDM4 M4A1 Worth It

The heart of this rifle is a 14.5-inch cold hammer forged, chrome-lined Chrome Moly Vanadium barrel in the classic M4 profile with a 1:7 twist. Daniel Defense pins and welds their flash suppressor to bring the overall barrel length to 16 inches, so it keeps that shorter, quicker-handling feel without any extra steps. The carbine-length gas system runs through a pinned low-profile gas block machined from 4140 hardened steel, and the whole setup has a well-earned reputation for eating whatever ammo you feed it. DD's cold hammer forged barrels are known to hold accuracy deep into five-figure round counts, so this is a rifle you buy once and shoot for years.

DDM4 M4A1 Ergonomics and Build Quality

Both receivers are CNC machined from 7075-T6 aluminum with a Type III hard coat anodized finish, and the lower gets a flared magwell for faster reloads plus a rear QD swivel point for sling mounting. The GRIP-N-RIP charging handle works from either side, and the Daniel Defense buttstock and pistol grip use glass-filled polymer with SoftTouch overmolding that feels great even in cold or wet conditions. At 6.74 pounds bare, it carries easier than most quad-rail guns.

The flat-top upper ships optic ready with no sights installed, and with Picatinny real estate on all four sides of the RIS II, mounting lights, lasers, grips, and irons is as simple as it gets. It comes with one 32-round magazine and a proper hard case, ready for the range the day you pick it up.

Key Specifications

  • Manufacturer: Daniel Defense
  • Model: DDM4 M4A1 RIS II
  • MPN: 02-088-11249-006
  • UPC: 818773023276
  • Caliber: 5.56 NATO / .223 Rem
  • Action: Semi-Auto, Direct Impingement
  • Barrel Length: 14.5" (16" overall with pinned & welded flash suppressor)
  • Barrel: Cold Hammer Forged Chrome Moly Vanadium, Chrome Lined, M4 Profile
  • Twist Rate: 1:7
  • Gas System: Carbine Length, Pinned Low-Profile Gas Block
  • Handguard: RIS II Picatinny Quad Rail, 6061-T6 Aluminum
  • Receivers: CNC Machined 7075-T6 Aluminum, Type III Hard Coat Anodized
  • Stock: Daniel Defense 6-Position Buttstock with SoftTouch Overmolding
  • Capacity: 32+1
  • Overall Length: 31.5" – 34.75"
  • Weight: 6.74 lbs

What’s Included

  • Daniel Defense DDM4 M4A1 rifle
  • One 32-round magazine
  • Full-latch impact plastic hard case

Frequently Asked Questions

Is the 14.5-inch barrel on the DDM4 M4A1 pinned and welded?

Yes. The Daniel Defense flash suppressor is permanently attached to the 14.5-inch barrel, bringing it to 16 inches overall. That means it transfers like any standard rifle with no extra registration steps, while keeping the shorter, faster-handling profile the M4A1 is known for.

Does the Daniel Defense M4A1 come with sights?

No, it ships optic ready with a flat-top upper and no iron sights installed. The upside is the RIS II quad rail gives you Picatinny mounting on all four sides plus the receiver, so you can set it up with a red dot, LPVO, or backup irons however you like.

Is this the same RIS II rail used by SOCOM?

It is. Daniel Defense developed the RIS II for the SOPMOD Block II program, and it has been fielded on issued M4A1s since 2005. This rifle pairs that same rail with DD's commercial upgrades like the cold hammer forged barrel and GRIP-N-RIP ambidextrous charging handle.

What kind of barrel life and accuracy can I expect from the DDM4 M4A1?

Daniel Defense's cold hammer forged, chrome-lined barrels are built for serious longevity, with round counts well into the tens of thousands before accuracy drops off. The 1:7 twist stabilizes everything from 55 grain plinking ammo up to heavier 77 grain match loads, and these rifles routinely shoot tight groups right out of the box.

Additional information

UPC

818773023276

Manufacturer

Manufacturer Part Number

02-088-11249-006

Action

ATF Type

RIFLE

Barrel Length

14.5"

Caliber/Gauge

.223 REM/5.56 NATO

Capacity

32 + 1

Length

34.75

Number of Magazines

1 32 rd.

Package Height

4.1

Package Width

11.0

Product Type

Rifle

Shipping Weight

12.75

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense DDM4 M4A1 5.56 NATO 14.5″ Rifle with RIS II Rail”