Description
CZ rimfire rifles are some of the best shooting .22s money can buy, but the skinny factory dovetail limits your ring and scope choices in a hurry. This EGW Heavy Duty base solves that by clamping onto the 3/8" dovetail of your CZ and giving you a full Picatinny rail up top. It is machined from solid 7075 T6 aircraft grade aluminum and finished in a Type III matte black hardcoat anodize, so it holds up to real field use and recoil from year to year. The cross slots are cut the full width of the rail and gauged to MIL-STD 1913 specs, which means your Picatinny or Weaver rings seat where they should and stay put.
Why This 3/8" CZ Dovetail Base Earns Its Spot
This is the 0 MOA version, so the rail sits flat with no built-in elevation. For most rimfire work inside about 150 yards, that is exactly what you want. It lets your scope sit centered in its adjustment range for plinking, squirrel hunting, and target work. If you plan on stretching a .17 HMR way out past 150, the 20 MOA version of this rail is the one to look at instead. The full-length slots also give you real flexibility to slide rings fore and aft and dial in proper eye relief, which matters when you are fitting a larger objective scope to a slim rimfire action.
Fitment Notes for the CZ 452, 453, 511 and 512
Here is the part worth slowing down on. CZ built these rifles with both 3/8" and 11mm dovetails over the years, and the two are not interchangeable. The surest way to know what you have is to measure across the top of the dovetail on your receiver. Roughly half an inch means you have the 3/8" dovetail and this base is your match. Around .437" means you have an 11mm dovetail and you will want the 11mm version. The base is right-handed only and installs with the included hardware, no gunsmithing required.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 80900
- UPC: 841370109289
- Fits: CZ 452, 453, 511, 512 with 3/8" dovetail
- Dovetail Size: 3/8" (measures approx .500" across top)
- MOA: 0 MOA
- Rail Type: One-Piece Picatinny
- Material: 7075 T6 Aircraft Grade Aluminum
- Finish: Matte Black Type III Hardcoat Anodized
- Overall Length: 5.575"
- Height: .540" (top of receiver to top of rail)
- Handedness: Right-Handed only
- Ring Compatibility: Picatinny or Weaver rings
- Torque Spec: 25 in-lbs
- Number of Bases: 1
What’s Included
- 1 EGW HD Picatinny rail base (0 MOA, 3/8" dovetail)
- Socket head Torx mounting screws (#6-32 x 3/4)
- T-15 Torx bit/wrench
Frequently Asked Questions
How do I know if I need the 3/8" dovetail version or the 11mm?
Measure across the top (the widest point) of the dovetail on your CZ receiver. If it measures about half an inch, you have the 3/8" dovetail and this base is the right one. If it comes in around .437", you have an 11mm dovetail and should go with the 11mm version instead.
What is the difference between 0 MOA and 20 MOA on this CZ rail?
This is the 0 MOA base, meaning it sits flat with no built-in elevation, which is ideal for most rimfire shooting inside roughly 150 yards. The 20 MOA option adds forward cant to help you reach out past 150 yards without running out of scope adjustment. For general plinking, hunting, and target use, 0 MOA is the common pick.
Does this base require drilling or tapping to install?
No. It clamps directly onto the factory 3/8" dovetail using the included Torx hardware, so no gunsmithing is needed. EGW recommends torquing to spec and a drop of blue thread locker to keep everything locked down.
What kind of scope rings will this rail accept?
The top of this base is a true one-piece Picatinny rail, so it accepts standard Picatinny or Weaver scope rings. The full-length cross slots give you room to position rings forward or back for proper eye relief, which helps when fitting a larger scope to a slim CZ rimfire action.




Reviews
There are no reviews yet.