Description
If you're loading 6.5 Creedmoor and want your bullets going in straight every single time, this is the die that gets it done. The Hornady Custom Grade seating die is part of the New Dimension family, built around an in-line seating system that holds the bullet, case neck, and seating stem in perfect alignment inside the sleeve before the bullet enters the brass. That little bit of engineering makes a real difference on paper, especially if you're chasing small groups with a flat-shooting 6.5.
What Sets the Custom Grade Seating Die Apart
The heart of this die is the floating bullet alignment sleeve paired with a floating steel seating stem. Instead of guessing and hoping the bullet drops in true, the sleeve centers everything up so the bullet seats dead straight. Less runout means more consistent rounds, and that consistency is what shows up when you're ringing steel at distance or working up a load. There's also a built-in crimper if you want to apply a light crimp to lock the bullet in place, though plenty of folks running bolt guns skip the crimp entirely. Either way, you've got the option.
Dialing In Your 6.5 Creedmoor Seating Depth
Adjustment is clean and repeatable. The seater adjustment screw lets you set your seating depth precisely, and the o-ring compression lock gives you the right tension to make fine tweaks easier while holding your setting in place. The Hornady Sure-Loc lock ring clamps around the full circumference of the die with even pressure, and the locking screw tightens without digging into the threads, so you're not chewing up the die with pliers over time. There's also a retainer ring that pops off in seconds, which makes cleaning and swapping the seating stem a quick job rather than a chore.
Machined from quality steel and made right here in the USA, this die holds up to heavy bench sessions and years of loading. Whether you're feeding a match rifle or just want cleaner, more accurate handloads, it's a solid piece to have on the press.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 044135
- UPC: 090255441352
- Cartridge: 6.5mm Creedmoor
- Bullet Diameter: .264"
- Die Type: Bullet Seating Die
- Die Series: Custom Grade New Dimension (Series I)
- Seating System: In-line with floating alignment sleeve and floating steel seating stem
- Crimp: Built-in crimper
- Lock Ring: Hornady Sure-Loc with wrench flats
- Material: Steel
- Country of Origin: USA
What’s Included
- Hornady Custom Grade 6.5 Creedmoor bullet seating die
- Sure-Loc lock ring
- Floating seating stem
Frequently Asked Questions
Is this 6.5 Creedmoor seating die a full die set or just the seater?
This is the bullet seating die only, not a complete die set. It's the die you'd use to seat your bullet to the correct depth after sizing and charging your brass. If you need to full-length size your cases too, you'll want to pair it with a sizing die.
Does the Hornady Custom Grade seating die apply a crimp?
Yes, it has a built-in crimper, so you can apply a light crimp to help hold the bullet in place if you want one. Many reloaders running bolt-action 6.5 Creedmoor rifles choose to skip the crimp for better consistency, but the option is there depending on how you load.
Will this die fit a standard reloading press?
Yes, it uses the standard 7/8-14 thread, so it threads right into any standard single-stage or progressive press. The Sure-Loc lock ring makes it easy to set your depth and keep it locked in between sessions.
What makes the in-line seating system better than a basic seater?
The in-line system uses a floating alignment sleeve and floating seating stem to line up the bullet, case neck, and stem before the bullet enters the case. This reduces bullet runout and helps produce straighter, more consistent rounds, which translates to better accuracy on target compared to a fixed or solid seater.




Reviews
There are no reviews yet.